Арматура кабельная, крепеж и аксессуары для кабеля
634 товара
- Сортировка
- Вид каталога
Зажим анкерный SO 252.01
Код поставщика
SO252.01
Класс ETIM
EC000244 - Зажим для натяжения кабеля/троса
Код РАЭК
1010442
Бренд
PAS/BLL-T 50-157 mm² AlMgSi
The connector SEW20 can be used with arc protection horn for arc protection for covered conductors. The connector has a place for an Al-thread, so it also works as an arc protection device. The connector can be used as a temporary earthing connector with an arc protection horn suitable for use with temporary earthing devices with screw fixing. The connector is watertight by silicone greased teeth.
Зажим анкерный SO 118.1202S
Код поставщика
SO118.1202S
Класс ETIM
EC000244 - Зажим для натяжения кабеля/троса
Код РАЭК
1010434
Бренд
50-150 mm² / 50-150 mm², Waterproof
SLIW58 is for use with insulated aluminium or copper conductors. Fully insulated bolt provides safe live line working. Both main and branch conductor insulations are pierced by single bolt action. Test voltage 6 kV/50 Hz/1 min in water. Connector's design enables live line installation without peeling insulation from conductor.
Al/Cu 6-50 mm² ø 8.5 mm
The cable lugs are used for terminating conductors of up to 1 kV cables. Because of the shear head bolt construction no crimping tools are needed. The required torque is achieved by tightening the bolt until the head breaks off. The lugs are longitudinally water tight and they are suitable for both aluminium and copper conductors as well as for solid or stranded and sector shaped or circular conductors.
Код поставщика
SAL1.27
Класс ETIM
EC001054 - Винтовой/болтовой кабельный наконечник
Код РАЭК
1010536
Бренд
Al/Cu 150-300 mm² ø 13 mm
The cable lugs are used for terminating conductors of up to 1 kV cables. Because of the shear head bolt construction no crimping tools are needed. The required torque is achieved by tightening the bolt until it breaks off. The lugs are longitudinally water tight and they are suitable both for aluminium and copper conductors, solid and stranded, sector shaped and circular.
Код поставщика
SAL4.27
Класс ETIM
EC001054 - Винтовой/болтовой кабельный наконечник
Код РАЭК
1010538
Бренд
PAS/BLL-T 150-241 AlMgSi
The connector SEW21 can be used with arc protection horn for arc protection for covered conductors. The connector has a place for an Al-thread, so it also works as an arc protection device. The length of 25 mm² Al thread is 2.1 m. The connector can be used as a temporary earthing connector with an arc protection horn suitable for use with temporary earthing devices with screw fixing. The connector is watertight by silicone greased teeth.
Al 6-95 / Al 6-95 mm²
Non tension aluminium to aluminium connector SL37.1 is equipped with one M8 bolt.
Al/Cu 95-185 mm² ø 13 mm
The cable lugs are used for terminating conductors of up to 1 kV cables. Because of the shear head bolt construction no crimping tools are needed. The required torque is achieved by tightening the bolt until it breaks off. The lugs are longitudinally water tight and they are suitable both for aluminium and copper conductors, solid and stranded, sector shaped and circular.
Код поставщика
SAL3.27
Класс ETIM
EC001054 - Винтовой/болтовой кабельный наконечник
Код РАЭК
1010537
Бренд
Without band
Distance clip for metal and concrete poles. Steel band fastening.
Код поставщика
SO79.5
Класс ETIM
EC000127 - Крепежная скоба/зажим для кабеля и труб
Код РАЭК
1010433
Бренд
16-120 mm² / 6-50 mm², Waterproof
SLIW54 is for use with insulated aluminium or copper conductors. Fully insulated bolt provides safe live line working. Both main and branch conductor insulations are pierced by single bolt action. Test voltage 6 kV/50 Hz/1 min in water. Connector's design enables hot line installation without peeling insulation from conductor.
Al 16-120 mm² / Cu 6-35 mm²
SM2.21 is for non tension aluminium to copper connections. As the upper section of the connector is divided, two copper branch conductors with different diameters can be connected to the aluminium main conductor. The connectors are brushed and prepared with joint compound, thus only the conductors need brushing and greasing. Equipped with two M8 bolts.
PAS/BLL-T 50-157 / 50-157 AlMgSi
The connector SLW25.2 is for non-tension aluminium to aluminium connections in MV up to 36 kV covered conductors without peeling the insulation. The connector is watertight by silicone greased teeth. The nominal insulation thickness of the conductor varies between 2.3-3.3 mm. Especially used with CC conductors. The connectors can be used with insulation cover SP16.
Зажим анкерный SO 250.01
Код поставщика
SO250.01
Класс ETIM
EC000244 - Зажим для натяжения кабеля/троса
Код РАЭК
1010440
Бренд
Al/Cu 10-70 mm² to Al/Cu 1.5-50 mm²
SLIP12.127 is for all connections of uninsulated aluminium or copper main and insulated branch conductors up to 1000 VAC. Equipped with shear head screw.
Main Al 25-95 or Cu 25-70 Branch Al 2.5-95 or Cu 1.5-70 mm²
SLIP22.127 is for all connections of uninsulated aluminium and copper main and insulated branch conductors up to 1000 VAC. Equipped with shear head screw.
Al/Cu 35-95 mm² 2 bolts
The connectors are used for jointing conductors of up to 1 kV cables. Because of the shear head bolt construction no crimping tools are needed. The required torque is achieved by tightening the bolt until it breaks off. The connectors are longitudinally water tight and they are suitable both for aluminium and copper conductors, solid and stranded, sector shaped and circular. The core insulation may be as well plastic as paper.
Код поставщика
SLJ2.27
Класс ETIM
EC001063 - Гильза соединительная винтовая/болтовая
Код РАЭК
1010532
Бренд
0,6/1 (1,2) 4x-4x 4x-4x6-35 mm² four core with connector
The joint kit is used for jointing 1 kV cables with plastic insulation and plastic outer sheath. The kit is suitable for 4 to 4 core and 4 to 3+1 core cables.
The kit includes four screw connectors suitable both for aluminium and copper conductors, grinding and cleaning materials, four heat shrink tubes for insulation and one for outer protection.
Код поставщика
SJK0C
Класс ETIM
EC001169 - Муфта кабельная соединительная/ переходная
Код РАЭК
1010534
Бренд
Main Al 16-150 or Cu 16-150 Branch Al 16-120 or Cu 16-95 mm²
The SLIP32.2 is for all connections of insulated aluminium and copper main and branch conductors up to 1000 VAC. The design enables hot line installation. The shear head is insulated from the bolt and the connector body. Equipped with shear head screw.
Al 16-120 mm² and Al 16-95 mm²
SL9.21 is used for aluminium to aluminium connections. The connector is equipped with springs made of stainless steel to make the installation easier. The design enables hot line installation without peeling insulation of the conductor. Allen type screw.
5.5x145 nail 10x50 plug
For attachment of an overhead cable or a conductor to a wooden pole or a wall. The nails are designed so that the installed cable does not come into contact with the pole or wall surface.
Код поставщика
SO76.19
Класс ETIM
EC000464 - Крепежный зажим для кабеля/трубы
Код РАЭК
1010561
Бренд
For wooden surfaces
For the attachment of an underground or a service cable to a wooden surfaces.