Кабельные наконечники и соединители (гильзы)
119 товаров
- Сортировка
- Вид каталога
PAS/BLL-T 50-157 mm² AlMgSi
The connector SEW20 can be used with arc protection horn for arc protection for covered conductors. The connector has a place for an Al-thread, so it also works as an arc protection device. The connector can be used as a temporary earthing connector with an arc protection horn suitable for use with temporary earthing devices with screw fixing. The connector is watertight by silicone greased teeth.
50-150 mm² / 50-150 mm², Waterproof
SLIW58 is for use with insulated aluminium or copper conductors. Fully insulated bolt provides safe live line working. Both main and branch conductor insulations are pierced by single bolt action. Test voltage 6 kV/50 Hz/1 min in water. Connector's design enables live line installation without peeling insulation from conductor.
Al/Cu 6-50 mm² ø 8.5 mm
The cable lugs are used for terminating conductors of up to 1 kV cables. Because of the shear head bolt construction no crimping tools are needed. The required torque is achieved by tightening the bolt until the head breaks off. The lugs are longitudinally water tight and they are suitable for both aluminium and copper conductors as well as for solid or stranded and sector shaped or circular conductors.
Код поставщика
SAL1.27
Класс ETIM
EC001054 - Винтовой/болтовой кабельный наконечник
Код РАЭК
1010536
Бренд
Al/Cu 150-300 mm² ø 13 mm
The cable lugs are used for terminating conductors of up to 1 kV cables. Because of the shear head bolt construction no crimping tools are needed. The required torque is achieved by tightening the bolt until it breaks off. The lugs are longitudinally water tight and they are suitable both for aluminium and copper conductors, solid and stranded, sector shaped and circular.
Код поставщика
SAL4.27
Класс ETIM
EC001054 - Винтовой/болтовой кабельный наконечник
Код РАЭК
1010538
Бренд
PAS/BLL-T 150-241 AlMgSi
The connector SEW21 can be used with arc protection horn for arc protection for covered conductors. The connector has a place for an Al-thread, so it also works as an arc protection device. The length of 25 mm² Al thread is 2.1 m. The connector can be used as a temporary earthing connector with an arc protection horn suitable for use with temporary earthing devices with screw fixing. The connector is watertight by silicone greased teeth.
Al 6-95 / Al 6-95 mm²
Non tension aluminium to aluminium connector SL37.1 is equipped with one M8 bolt.
Al/Cu 95-185 mm² ø 13 mm
The cable lugs are used for terminating conductors of up to 1 kV cables. Because of the shear head bolt construction no crimping tools are needed. The required torque is achieved by tightening the bolt until it breaks off. The lugs are longitudinally water tight and they are suitable both for aluminium and copper conductors, solid and stranded, sector shaped and circular.
Код поставщика
SAL3.27
Класс ETIM
EC001054 - Винтовой/болтовой кабельный наконечник
Код РАЭК
1010537
Бренд
16-120 mm² / 6-50 mm², Waterproof
SLIW54 is for use with insulated aluminium or copper conductors. Fully insulated bolt provides safe live line working. Both main and branch conductor insulations are pierced by single bolt action. Test voltage 6 kV/50 Hz/1 min in water. Connector's design enables hot line installation without peeling insulation from conductor.
Al 16-120 mm² / Cu 6-35 mm²
SM2.21 is for non tension aluminium to copper connections. As the upper section of the connector is divided, two copper branch conductors with different diameters can be connected to the aluminium main conductor. The connectors are brushed and prepared with joint compound, thus only the conductors need brushing and greasing. Equipped with two M8 bolts.
PAS/BLL-T 50-157 / 50-157 AlMgSi
The connector SLW25.2 is for non-tension aluminium to aluminium connections in MV up to 36 kV covered conductors without peeling the insulation. The connector is watertight by silicone greased teeth. The nominal insulation thickness of the conductor varies between 2.3-3.3 mm. Especially used with CC conductors. The connectors can be used with insulation cover SP16.
Al/Cu 10-70 mm² to Al/Cu 1.5-50 mm²
SLIP12.127 is for all connections of uninsulated aluminium or copper main and insulated branch conductors up to 1000 VAC. Equipped with shear head screw.
Main Al 25-95 or Cu 25-70 Branch Al 2.5-95 or Cu 1.5-70 mm²
SLIP22.127 is for all connections of uninsulated aluminium and copper main and insulated branch conductors up to 1000 VAC. Equipped with shear head screw.
Al/Cu 35-95 mm² 2 bolts
The connectors are used for jointing conductors of up to 1 kV cables. Because of the shear head bolt construction no crimping tools are needed. The required torque is achieved by tightening the bolt until it breaks off. The connectors are longitudinally water tight and they are suitable both for aluminium and copper conductors, solid and stranded, sector shaped and circular. The core insulation may be as well plastic as paper.
Код поставщика
SLJ2.27
Класс ETIM
EC001063 - Гильза соединительная винтовая/болтовая
Код РАЭК
1010532
Бренд
Main Al 16-150 or Cu 16-150 Branch Al 16-120 or Cu 16-95 mm²
The SLIP32.2 is for all connections of insulated aluminium and copper main and branch conductors up to 1000 VAC. The design enables hot line installation. The shear head is insulated from the bolt and the connector body. Equipped with shear head screw.
Al 16-120 mm² and Al 16-95 mm²
SL9.21 is used for aluminium to aluminium connections. The connector is equipped with springs made of stainless steel to make the installation easier. The design enables hot line installation without peeling insulation of the conductor. Allen type screw.
(Al 10-95 mm² or Cu 1.5-70 mm²) to (Al 10-95 mm² or Cu 1.5-70 mm²)
The SLIP22.1 is for all connections of insulated aluminium and copper main and branch conductors up to 1000 VAC. The design enables hot line installation. The shear head is insulated from the bolt and the connector body. Equipped with shear head screw.
Al/Cu 6-50 mm² 2 bolts
The connectors are used for jointing conductors of up to 1 kV cables. Because of the shear head bolt construction no crimping tools are needed. The required torque is achieved by tightening the bolt until it breaks off. The connectors are longitudinally water tight and they are suitable both for aluminium and copper conductors, solid and stranded, sector shaped and circular. The core insulation may be as well plastic as paper.
Код поставщика
SLJ1.27
Класс ETIM
EC001063 - Гильза соединительная винтовая/болтовая
Код РАЭК
1010531
Бренд
Main Al10-150mm² or Cu10-95mm² Branch Al10-54.6mm² or Cu10-35mm²
SL24 is for all connections of insulated aluminium and copper main and branch
conductors up to 1000 VAC.
Al 6-95 / Al 6-95 mm²
Non tension aluminium to aluminium connector SL37.2 is equipped with two M8 bolts.
Al/Cu 6-95 / Al/Cu 6-95 mm²
Non tension aluminium/copper to aluminium/copper connections. SL37.27 is for Al or Cu connections where no mechanical tension is involved. The body is made of tin plated aluminium alloy, and the bolts are hot-dip galvanized steel.
Al/Cu 95-240 mm² 4 bolts
The connectors are used for jointing conductors of up to 1 kV cables. Because of the shear head bolt construction no crimping tools are needed. The required torque is achieved by tightening the bolt until it breaks off. The connectors are longitudinally water tight and they are suitable both for aluminium and copper conductors, solid and stranded, sector shaped and circular. The core insulation may be as well plastic as paper.
Код поставщика
SLJ3.47
Класс ETIM
EC001063 - Гильза соединительная винтовая/болтовая
Код РАЭК
1010533
Бренд
Al 10-120 mm² or Al/Cu 10-95 mm²
SL 16.24 is for PEX insulated conductor. Main/ branch conductor Al 50-150 mm² /Al 50- 120 mm² or Main/ branch conductor Al/Cu 10-95 mm² /Al/Cu 10-95 mm².
25-150 mm² / 6-35 mm², Waterproof
SLIW56 is for use with insulated aluminium or copper conductors. Fully insulated bolt provides safe live line working. Both main and branch conductor insulations are pierced by single bolt action. Test voltage 6 kV/50 Hz/1 min in water. Connector's design enables live line installation without peeling insulation from conductor.
25-150 mm² / 25-95 mm², Waterproof
SLIW57 is for use with insulated aluminium or copper conductors. Fully insulated bolt provides safe live line working. Both main and branch conductor insulations are pierced by single bolt action. Test voltage 6 kV/50 Hz/1 min in water. Connector's design enables hot line installation without peeling insulation from conductor.
16-150 mm² / 1.5-16 mm², Waterproof
SLIW52 is for use with insulated aluminium or copper conductors. Fully insulated bolt provides safe live line working. Both main and branch conductor insulations are pierced by single bolt action. Test voltage 6 kV/50 Hz/1 min in water. Connector's design enables live line installation without peeling insulation from conductor.
Al 10-50 mm² / Cu 1.5-10 mm²
SM1.11 is for non tension aluminium to copper connections. The connectors are brushed and prepared with joint compound, thus only the conductors need brushing and greasing. Equipped with one M8 bolt.
Al 16-120 mm² / Al 16-120 mm²
SL4.21 is brushed and prepared with joint compound and so, only the conductors need brushing and greasing. Non tension aluminium to aluminium connector is equipped with two M8 bolts.
Al/Cu 16-120 mm² / Al/Cu 16-120 mm²
SL4.26 is for non tension connections of aluminium and copper main and branch conductors. The body is made of tin plated aluminium alloy, and the bolts are hot-dip galvanized steel. Equipped with two M8 bolts.