Ручной инструмент общего назначения
56 товаров
- Сортировка
- Вид каталога
Чулок монтажный СТ 103.106-50
Used for steel bands COT37
CT42 is a special tool which is used for tightening the steel band COT37.
Код поставщика
CT42
Класс ETIM
EC000453 - Инструмент для (затягивания) кабельных стяжек
Код РАЭК
1010494
Holding tool for connectors
The ST34 is for holding the connector while tightening the bolts. Approved also for insulation piercing connectors with live conductors.
Ø 13.46-18.80 mm
For tensioning both bare and covered conductors' overhead line spans. The grips cover a wide range of diameters and make a good fixing and high tension force. CT102.1201 is easy to install and change on the line.
Код поставщика
CT102.1201
Класс ETIM
EC003007 - Аксессуары для устройств прокладки кабеля
Код РАЭК
1142577
Single 450 kg / Double 900 kg
CT116.3 is a ratchet puller for line tensioning.
4x25-50 mm²
For tensioning overhead line spans of four core cables. The grips cover a wide range of diameters and can supply high-tension force.
Код поставщика
ST102.50
Класс ETIM
EC003007 - Аксессуары для устройств прокладки кабеля
Код РАЭК
1010484
Single 750 kg / Double 1500 kg
A hand powered hoist with a ratcheted wheel. Used for line tensioning.
4x70-95 mm²
For tensioning overhead line spans of four core cables. The grips cover a wide range of diameters and can supply high-tension force.
Код поставщика
ST102.95
Класс ETIM
EC003007 - Аксессуары для устройств прокладки кабеля
Код РАЭК
1010485
40 - 50 mm, metal
Conductor grips are made of high grade galvanised steel wire, in a double weave construction for a safe and secure cable pulling. Grip length is 600 mm.
30-40 mm, metal
Conductor grips are made of high grade galvanised steel wire, in a double weave construction for a safe and secure cable pulling. Grip length is 600 mm.
Щетка для алюминиевых соединений
Используется для зачистки алюминиевых соединений. Дальнейшее окисление контактной поверхности предотвращается при помощи смазки SR1.
Ø 7.87-13.46 mm
For tensioning both bare and covered conductors overhead line spans. The grips cover a wide range of diameters and make a good fixing and high tension force. CT102 is easy to install and change on the line.
Код поставщика
CT102.501
Класс ETIM
EC003007 - Аксессуары для устройств прокладки кабеля
Код РАЭК
1010482
Cable groove 50 mm, nylon
Stringing wheel ST26.1 for straight line sections. Sheave is made of nylon and frame of galvanized steel. In dimensioning the wheel frame, the conductor attachment beside the used clamp has been taken into account. The hooks of the wheel are dimensioned so that they are suitable to be hung on hooks.
Код поставщика
ST26.1
Класс ETIM
EC002217 - Направляющий ролик/шкив для троса/кабеля
Код РАЭК
1010496
Cумка/карман для инструментов пластик EnstoC-40 for CT60.78
Water repellent, yellow, vinyl, nylon-reinforced ducting with carrying strap attached.
Snap type flap on open end.
Код поставщика
CT11.120
Класс ETIM
EC000181 - Ящик/ сумка/ кейс/ жилет для инструментов
Код РАЭК
1579902
Pulley with upper sheave
The stringing wheel is fixed on the neck of the insulator, so that the wheel is on the side of pulling direction. The type ST 168.2 is equipped with an upper sheave which keeps the pulling wire and conductor on the wheel also on uneven ground.
Код поставщика
ST168.2
Класс ETIM
EC003007 - Аксессуары для устройств прокладки кабеля
Код РАЭК
1584053
Single 680 kg / Double 1360 kg
CT116.7 is a ratchet puller for line tensioning.
Ящик для инструментов кожа/металл EnstoДинамометр для регулировки стрел провеса проводника тяга 1 тонна
For mechanical tension adjustment of overhead lines and insulated conductors. Lightweight and compact. The dynamometer ST112.1 has a built-in measuring dial with scales according to the maximum load. Eyelet 16 mm.
Код поставщика
ST112.1
Класс ETIM
EC000181 - Ящик/ сумка/ кейс/ жилет для инструментов
Код РАЭК
1584040
20-30 mm, metal
Conductor grips are made of high grade galvanised steel wire, in a double weave construction for safe and secure cable pulling. Grip length is 600 mm.
Hexagonal 6 mm
The ST32 is approved also for insulation piercing connectors with live conductors.
Код поставщика
ST32
Класс ETIM
EC000818 - Шестигранный (имбусовый) торцовый ключ (для винтов с внутр. шестигранником)
Код РАЭК
1584081
For SH0, SH1, SH2 and SH3
Tightening tool for pole reinforcer.
Код поставщика
ST55
Класс ETIM
EC003007 - Аксессуары для устройств прокладки кабеля
Код РАЭК
1584082