Кабельные наконечники и соединители (гильзы)
119 товаров
- Сортировка
- Вид каталога
PAS/BLL-T 50-157 mm² AlMgSi, with temporary earthing horn
SEW20.3 is used as a temporary earthing connector where the arc protection devices SEW20.1 or SEW20.2 are not present. The connector SEW20.3 includes an arc protection horn suitable for use with temporary earthing devices with screw fixing. The connector has a place for an Al-thread, so it also works as an arc protection device. The connector is watertight by silicone greased teeth.
Al 95-185 mm² ø 13 mm
The cable lugs are used for terminating conductors of up to 1 kV cables. Because of the shear head bolt construction no crimping tools are needed. The required torque is achieved by tightening the bolt until it breaks off. The lugs are longitudinally water tight and they are suitable for aluminium conductors, solid and stranded, sector shaped and circular.
Cu 10-16/16-25 mm²
SE36 is for copper to copper connections where also mechanical tension can be involved. The massive C-formed connector secures continuous electrical contact and low resistance.
95-120 mm² SLJ4.47
The filler pieces are used together with SLJ shear head bolt connectors, when it is necessary to join conductor sizes smaller than the range of the connector allows. They are suitable for both aluminium and copper conductors. The piece extends the size of the conductor to the minimum size required for the connector.
Al/Cu 70-240 mm²
The connector is used for jointing conductors of cables up to 36 kV. Because of the shear head bolt construction, no crimping tools are needed. The required torque is achieved by tightening the bolt until it breaks off. The adapter needed in tightening is included in the package. The connector is water tight. It is suitable for aluminium and copper conductors: solid and stranded, sector shaped and circular. The cable core insulation may be plastic or paper.
Код поставщика
SMJ2.47
Класс ETIM
EC001063 - Гильза соединительная винтовая/болтовая
Код РАЭК
1583638
Al/Cu 10-95 mm², Ø13
The cable lug is used for terminating conductors of cables up to 36 kV. Because of the shear head bolt construction, no crimping tools are needed. The required torque is achieved by tightening the bolt until it breaks off. The adapter needed in tightening is included in the package. The lug is longitudinally water tight. It is suitable for aluminium and copper conductors: solid and stranded, sector shaped and circular.
Код поставщика
SML1.17
Класс ETIM
EC001054 - Винтовой/болтовой кабельный наконечник
Код РАЭК
1583639
Al/Cu 70-240 mm², Ø13
The cable lug is used for terminating conductors of cables up to 36 kV. Because of the shear head bolt construction, no crimping tools are needed. The required torque is achieved by tightening the bolt until it breaks off. The adapter needed in tightening is included in the package. The lug is longitudinally water tight. It is suitable for aluminium and copper conductors: solid and stranded, sector shaped and circular.
Код поставщика
SML2.27
Класс ETIM
EC001054 - Винтовой/болтовой кабельный наконечник
Код РАЭК
1583640
Al/Cu 70-240 mm², Ø17
The cable lug is used for terminating conductors of cables up to 36 kV. Because of the shear head bolt construction, no crimping tools are needed. The required torque is achieved by tightening the bolt until it breaks off. The adapter needed in tightening is included in the package. The lug is longitudinally water tight. It is suitable for aluminium and copper conductors: solid and stranded, sector shaped and circular.
Код поставщика
SML2.272
Класс ETIM
EC001054 - Винтовой/болтовой кабельный наконечник
Код РАЭК
1583641
PAS/BLL-T 150-241 AlMgSi, with temporary earthing horn
SEW21.4 is used as a temporary earthing connector where the arc protection devices SEW21.1 or SEW21.2 are not present. The connector SEW21.4 includes an arc protection horn suitable for use with temporary earthing devices with screw fixing. The connector SEW21.4 includes an Al-thread to connect the connector to the neck of the insulator. The length of 25 mm² Al thread is 2.1 m. The connector is watertight by silicone greased teeth.
Al 4x10-35 mm² / Cu 1.5-25 mm²
KE10.1N connector can be used for aluminium and copper conductors. Tightening torque is 10 Nm. The connectors are used either inside metal poles or in separate boxes.
Код поставщика
KE10.1N
Класс ETIM
EC000306 - Слаботочный соединитель (зажим кабельный)
Код РАЭК
1580488
Cu 2x1.5-25 mm² and Al 2x10-35 mm², multitap
Multitap connectors is specially designed for use with universal piercing connectors e.g. SL11.118 and SLIP22.1 up to 1000 V a.c. to facilitate several out-going conductors. Each branch conductor can be connected with a separate screw.
Al/Cu 95-185 mm² ø 17 mm
The cable lugs are used for terminating conductors of up to 1 kV cables. Because of the shear head bolt construction no crimping tools are needed. The required torque is achieved by tightening the bolt until it breaks off. The lugs are longitudinally water tight and they are suitable both for aluminium and copper conductors, solid and stranded, sector shaped and circular.
Код поставщика
SAL3.272
Класс ETIM
EC001054 - Винтовой/болтовой кабельный наконечник
Код РАЭК
1583412
Al/Cu 150-300 mm² ø 17 mm
The cable lugs are used for terminating conductors of up to 1 kV cables. Because of the shear head bolt construction no crimping tools are needed. The required torque is achieved by tightening the bolt until it breaks off. The lugs are longitudinally water tight and they are suitable both for aluminium and copper conductors, solid and stranded, sector shaped and circular.
Код поставщика
SAL4.272
Класс ETIM
EC001054 - Винтовой/болтовой кабельный наконечник
Код РАЭК
1583415
Прокалывающий зажим Al/Cu 50-150 мм² / Al/Cu 70-240 мм², герметичный
Прокалывающий зажим Al/Cu 50-150 мм² / Al/Cu 70-240 мм², герметичный
Прокалывающий зажим Al/Cu 70-120 мм² / Al/Cu 70-240 мм², герметичный
Прокалывающий зажим Al/Cu 70-120 мм² / Al/Cu 70-240 мм², герметичный
1x2.5-35 mm²
Reusable connectors is specially designed for use with universal piercing connectors e.g. SLIW57 up to 1000 V a.c. Allows service line disconnection without removing a main connector. SLIW65 is for use with aluminium or copper conductors
PAS/BLL-T 50-157 mm² AlMgSi, with plain horn and Al-thread
The connector SEW20.2 includes an Al-thread to connect the connector to the neck of the insulator. The length of 25 mm² Al thread is 2.1 m. The connector is watertight by silicone greased teeth.
PAS/BLL-T 150-241 AlMgSi, with plain hornand Al-thread
The connector SEW21.2 includes an Al-thread to connect the connector to the neck of the insulator. The length of 25 mm² Al thread is 2.1 m. The connector is watertight by silicone greased teeth.
PAS/BLL-T 150-241 AlMgSi, with plain horn
The connector SEW21.1 includes an arc protection horn and is used for arc protection for covered conductors. The connector is watertight by silicone greased teeth.
Al/Cu 16-150 mm² and Al 16-120 mm², Cu 16-95 mm²
All connections of insulated/bareline aluminium and copper main and branch conductors up to 1000 VAC. SLIP32.21 connector has special multitooth construction.
In comparison with the conventional blade type connectors the SLIP-series with many contact points offers many advantages for example less mechanical damage to the main conductor, better electrical features, endures vibration better and no need for additional end-caps.
AAAC 16-50 mm²
SN2.2 is used for the termination of aluminium conductors to poles or walls. Equipped with two M8 bolts.
Al 16-120 mm² / Cu 6-35 mm²
SM2.25 is for non tension aluminium to copper connections. As the upper section of the connector is divided, two copper branch conductors with different diameters can be connected to the aluminium main conductor. The connectors are brushed and prepared with joint compound, thus only the conductors need brushing and greasing. SM 2.25 is equipped with springs to make the installation even easier. Equipped with two M8 bolt.
Al/Cu 50-240 / Al 50-185 Cu 50-150 mm²
SL14.2 is for Al or Cu connections where no mechanical tension is involved. The body is made of tin plated aluminium alloy, and the bolts are hot-dip galvanized steel.
Al 16-95 mm² / Cu 2.5-25 mm²
SM2.11 is for non tension aluminium to copper connections. The connectors are brushed and prepared with joint compound, thus only the conductors need brushing and greasing. Equipped with one M8 bolt.
Cu 16-70 mm² and 10-50 mm²
SE12.1 is for non tension copper to copper connections or for the connection of an earthing conductor. The connector is made of copper and the bolt is stainless steel.
AL 16-120 mm² and Al 16-35 mm²
SL9.11 is used for aluminium to aluminium connections. The connector has one bolt.
3x KE10.504 ja 1x KE10.506 (Al 10-50 / Cu 2.5-35)
SV50 includes three phase connectors KE10.504, one earthing connector KE10.506 and a 0,35 m long 16 mm² earthing wire with a cable lug.
Код поставщика
SV50
Класс ETIM
EC000306 - Слаботочный соединитель (зажим кабельный)
Код РАЭК
1584127
PAS/BLL-T 50-157 / 50-157 AlMgSi
The connector SLW25.22 is for non-tension aluminium to aluminium connections in MV up to 36 kV covered conductors without peeling the insulation. The connector is watertight by silicone greased teeth. The nominal insulation thickness of the conductor varies between 2.3-3.3 mm. Especially used with CC conductors. The connectors can be used with insulation cover SP16. Connector SLW25.22 is equipped with a shear head bolt.
Al/Cu 150-300 mm² 4 bolts
The connectors are used for jointing conductors of up to 1 kV cables. Because of the shear head bolt construction no crimping tools are needed. The required torque is achieved by tightening the bolt until it breaks off. The connectors are longitudinally water tight and they are suitable both for aluminium and copper conductors, solid and stranded, sector shaped and circular. The core insulation may be as well plastic as paper.
Код поставщика
SLJ4.47
Класс ETIM
EC001063 - Гильза соединительная винтовая/болтовая
Код РАЭК
1583604