Арматура кабельная, крепеж и аксессуары для кабеля
47549 товаров
- Сортировка
- Вид каталога
DKC Взрывозащищенный кабельный ввод ANS под небронированный кабель NPT3" D62-68мм. Никелированная латунь. IP66/68Взрывозащищенный кабельный ввод ANS под небронированный кабель NPT3" D62-68мм. Никелированная латунь. IP66/68
Код поставщика
6018ANSLKGN9SB
Класс ETIM
EC000441 - Резьбовой уплотнительный кабельный ввод (сальник/гермоввод)
Код РАЭК
2388533
Бренд
Резьбовой кабельный ввод PG FortisflexКабельный ввод PG-R-16
Код поставщика
80030
Класс ETIM
EC000441 - Резьбовой уплотнительный кабельный ввод (сальник/гермоввод)
Код РАЭК
1830043
Бренд
Резьбовой кабельный ввод PG FortisflexКабельный ввод PG-R-21
Код поставщика
80031
Класс ETIM
EC000441 - Резьбовой уплотнительный кабельный ввод (сальник/гермоввод)
Код РАЭК
1830044
Бренд
Резьбовой кабельный ввод с метрической резьбой 24-30мм пластик IP68 FortisflexСальник MG 40 (24-30мм) IP68 (Fortisflex)
Код поставщика
58423
Класс ETIM
EC000441 - Резьбовой уплотнительный кабельный ввод (сальник/гермоввод)
Код РАЭК
1243657
Бренд
Резьбовой кабельный ввод с метрической резьбой 30-39мм пластик IP68 FortisflexСальник MG 50 (30-39 мм) IP68 (Fortisflex)
Код поставщика
57149
Класс ETIM
EC000441 - Резьбовой уплотнительный кабельный ввод (сальник/гермоввод)
Код РАЭК
1243658
Бренд
1x2.5-35 mm²
Reusable connectors is specially designed for use with universal piercing connectors e.g. SLIW57 up to 1000 V a.c. Allows service line disconnection without removing a main connector. SLIW65 is for use with aluminium or copper conductors
PAS/BLL-T 150-241 AlMgSi, with plain hornand Al-thread
The connector SEW21.2 includes an Al-thread to connect the connector to the neck of the insulator. The length of 25 mm² Al thread is 2.1 m. The connector is watertight by silicone greased teeth.
PAS/BLL-T 150-241 AlMgSi, with plain horn
The connector SEW21.1 includes an arc protection horn and is used for arc protection for covered conductors. The connector is watertight by silicone greased teeth.
Al/Cu 16-150 mm² and Al 16-120 mm², Cu 16-95 mm²
All connections of insulated/bareline aluminium and copper main and branch conductors up to 1000 VAC. SLIP32.21 connector has special multitooth construction.
In comparison with the conventional blade type connectors the SLIP-series with many contact points offers many advantages for example less mechanical damage to the main conductor, better electrical features, endures vibration better and no need for additional end-caps.
AAAC 16-50 mm²
SN2.2 is used for the termination of aluminium conductors to poles or walls. Equipped with two M8 bolts.
Al 16-120 mm² / Cu 6-35 mm²
SM2.25 is for non tension aluminium to copper connections. As the upper section of the connector is divided, two copper branch conductors with different diameters can be connected to the aluminium main conductor. The connectors are brushed and prepared with joint compound, thus only the conductors need brushing and greasing. SM 2.25 is equipped with springs to make the installation even easier. Equipped with two M8 bolt.
Al 16-95 mm² / Cu 2.5-25 mm²
SM2.11 is for non tension aluminium to copper connections. The connectors are brushed and prepared with joint compound, thus only the conductors need brushing and greasing. Equipped with one M8 bolt.
Cu 16-70 mm² and 10-50 mm²
SE12.1 is for non tension copper to copper connections or for the connection of an earthing conductor. The connector is made of copper and the bolt is stainless steel.
Зажим оттяжки 25-68 мм²
Зажим оттяжки 25-68 мм²
Гильза фазовая MJPT 95N
Код поставщика
MJPT 95 N
Класс ETIM
EC001060 - Гильза соединительная обжимная для алюминиевых проводников
Код РАЭК
990289
Бренд
AL 16-120 mm² and Al 16-35 mm²
SL9.11 is used for aluminium to aluminium connections. The connector has one bolt.
PAS/BLL-T 50-157 / 50-157 AlMgSi
The connector SLW25.22 is for non-tension aluminium to aluminium connections in MV up to 36 kV covered conductors without peeling the insulation. The connector is watertight by silicone greased teeth. The nominal insulation thickness of the conductor varies between 2.3-3.3 mm. Especially used with CC conductors. The connectors can be used with insulation cover SP16. Connector SLW25.22 is equipped with a shear head bolt.
Al/Cu 150-300 mm² 4 bolts
The connectors are used for jointing conductors of up to 1 kV cables. Because of the shear head bolt construction no crimping tools are needed. The required torque is achieved by tightening the bolt until it breaks off. The connectors are longitudinally water tight and they are suitable both for aluminium and copper conductors, solid and stranded, sector shaped and circular. The core insulation may be as well plastic as paper.
Код поставщика
SLJ4.47
Класс ETIM
EC001063 - Гильза соединительная винтовая/болтовая
Код РАЭК
1583604
Бренд
2x6-35 mm²
Multitap connectors is specially designed for use with universal piercing connectors e.g. SLIW57, SLIW58, SL11.118, SLIP22.1,SLIP22.127 and SLIP32.2 up to 1000 V a.c. to facilitate several out-going conductors. Each branch conductor can be connected with a separate screw.
4x6-35 mm²
Multitap connectors is specially designed for use with universal piercing connectors e.g. SLIW57, SLIW58, SL11.118, SLIP22.1, SLIP22.127 and SLIP32.2 up to 1000 V a.c. to facilitate several out-going conductors. Each branch conductor can be connected with a separate screw.
1x2.5-35 mm²
Reusable connectors is specially designed for use with universal piercing connectors e.g. SLIW57 up to 1000 V a.c. Allows service line disconnection without removing a main connector. SLIW65S is for use with aluminium or copper conductors
Al 4x10-50 mm² / Cu 2.5-35 mm²
KE10.504 connector can be used for aluminium and copper conductors. Tightening torque is 10 Nm. The connectors are used either inside metal poles or in separate boxes.
Код поставщика
KE10.504
Класс ETIM
EC000306 - Слаботочный соединитель (зажим кабельный)
Код РАЭК
1580490
Бренд
Наконечник CPTA R 16
Код поставщика
CPTA R 16
Класс ETIM
EC001053 - Наконечник кабельный обжимной для алюминиевых проводников
Код РАЭК
990243
Бренд
Al 95-185, Cu 95-150 mm² ø 16,5 mm
The cable lugs are used for terminating conductors of up to 1 kV cables. Because of the shear head bolt construction no crimping tools are needed. The required torque is achieved by tightening the bolt until the head breaks off. The lugs are longitudinally water tight and they are suitable for both aluminium and copper conductors, solid and stranded as well as for sector shaped and circular conductors.
Код поставщика
LUG95-185/16LVTIN
Класс ETIM
EC001054 - Винтовой/болтовой кабельный наконечник
Код РАЭК
1580893
Бренд
Fortisflex Комплект для маркировки МК-01Комплект для маркировки МК-01 (Fortisflex)
Для маркировки оптических кабелей на кабельных трассах.Материал бирки: АБС-пластикат.Цвет бирки: белый.Цвет надписи: черный.Температура эксплуатации: от -40C до +85C.Состав комплекта:бирки пластиковые- 1 уп. (50 шт).стяжки нейлоновые- 1 уп.(100 шт.).маркер перманентный- 1 шт...Применяется для маркировки кабелей в колодцах ...