Инструменты для опрессовки, резки и изоляции
6 товаров
- Сортировка
- Вид каталога
Two plastic wedges
During the installation of connectors, the phase conductors of an insulated twisted overhead cable can be separated by using the wedge ST31. The wedge can be used when installing suspension clamps.
Код поставщика
ST31
Класс ETIM
EC002778 - Установка для снятия изоляции и обжима кабеля
Код РАЭК
1010495
Бренд
Bonded insulation screen removal tool Ø10-52 mm
ST250 peeling machine for the semi-conductive insulation screen for MV cables. The machine leaves an even surface, and the peeling depth can be adjusted with a suspended screw allowing the adjusted depth to remain even during the entire peeling process. For MV cables with diameters from 10 to 52 mm. The tool leaves only 25 mm of the semi-conductive layer and does not need a stopper to achieve desired peeling lenght.
Including rigid case and silicone grease.
Товары 1 - 6 из 6