Зажим/сжим ответвительный
498 товаров
- Сортировка
- Вид каталога
N- oder PE-Verbindungsklemme, bis 16 qmm
N- oder PE-Verbindungsklemme, bis 16 mm².
CT 70 (ответвительный зажим) - ВК
Герметический зажим предназнач. для всех видов проводников алюм. или мед. изолир. жил., сеч. магистрали 16-95кв.мм., сеч. ответвления 2.5-35кв.мм.
Код поставщика
CT 70 - ВК
Класс ETIM
EC001062 - Зажим/сжим ответвительный
Код РАЭК
764029
Бренд
ТД-ВЛИ-КОМПЛЕКТ
CT1S 25-95 (ответвительный зажим) - ВК
Герметический зажим предназнач. для всех видов проводников алюм. или мед. изолир. жил., сеч. магистрали 25-95кв.мм., сеч. ответвления 25-95кв.мм.
Код поставщика
CT1S 25-95 - ВК
Класс ETIM
EC001062 - Зажим/сжим ответвительный
Код РАЭК
764030
Бренд
ТД-ВЛИ-КОМПЛЕКТ
CBP 2 (ответвительный зажим) - ВК
Влагозащищенный ответвительный зажим
Код поставщика
CBP 2 - ВК
Класс ETIM
EC001062 - Зажим/сжим ответвительный
Код РАЭК
900552
Бренд
ТД-ВЛИ-КОМПЛЕКТ
P 95 (ответвительный зажим) - Нилед
СНЯТ С ПРОИЗВОДСТВА!!! Герметичный прокалывающий зажим предназначен для всех видов проводников алюм. и мед. жил. Возможен монтаж под напряжением. сечение магистрали 16-150кв.мм., сечение ответвления 16-95кв.мм. Масса=180Г.
PAS/BLL-T 150-241 AlMgSi, with temporary earthing horn
SEW21.4 is used as a temporary earthing connector where the arc protection devices SEW21.1 or SEW21.2 are not present. The connector SEW21.4 includes an arc protection horn suitable for use with temporary earthing devices with screw fixing. The connector SEW21.4 includes an Al-thread to connect the connector to the neck of the insulator. The length of 25 mm² Al thread is 2.1 m. The connector is watertight by silicone greased teeth.
Cu 2x1.5-25 mm² and Al 2x10-35 mm², multitap
Multitap connectors is specially designed for use with universal piercing connectors e.g. SL11.118 and SLIP22.1 up to 1000 V a.c. to facilitate several out-going conductors. Each branch conductor can be connected with a separate screw.
СТ1S 95-25-ВК
Ответвительный герметичный зажим (испытания 6кВ в воде), 25-95/25-95
Болтовой ответвительный зажим (MDT-240/95)
Болтовые ответвительные зажимы, 95-240/25-95
Болтовой ответвительный зажим (MDT-95)
Болтовые ответвительные зажимы, 25-95/25-95
1x2.5-35 mm²
Reusable connectors is specially designed for use with universal piercing connectors e.g. SLIW57 up to 1000 V a.c. Allows service line disconnection without removing a main connector. SLIW65 is for use with aluminium or copper conductors
PAS/BLL-T 150-241 AlMgSi, with plain hornand Al-thread
The connector SEW21.2 includes an Al-thread to connect the connector to the neck of the insulator. The length of 25 mm² Al thread is 2.1 m. The connector is watertight by silicone greased teeth.
PAS/BLL-T 150-241 AlMgSi, with plain horn
The connector SEW21.1 includes an arc protection horn and is used for arc protection for covered conductors. The connector is watertight by silicone greased teeth.
Al/Cu 16-150 mm² and Al 16-120 mm², Cu 16-95 mm²
All connections of insulated/bareline aluminium and copper main and branch conductors up to 1000 VAC. SLIP32.21 connector has special multitooth construction.
In comparison with the conventional blade type connectors the SLIP-series with many contact points offers many advantages for example less mechanical damage to the main conductor, better electrical features, endures vibration better and no need for additional end-caps.
AAAC 16-50 mm²
SN2.2 is used for the termination of aluminium conductors to poles or walls. Equipped with two M8 bolts.
Al 16-120 mm² / Cu 6-35 mm²
SM2.25 is for non tension aluminium to copper connections. As the upper section of the connector is divided, two copper branch conductors with different diameters can be connected to the aluminium main conductor. The connectors are brushed and prepared with joint compound, thus only the conductors need brushing and greasing. SM 2.25 is equipped with springs to make the installation even easier. Equipped with two M8 bolt.
Al 16-95 mm² / Cu 2.5-25 mm²
SM2.11 is for non tension aluminium to copper connections. The connectors are brushed and prepared with joint compound, thus only the conductors need brushing and greasing. Equipped with one M8 bolt.
Cu 16-70 mm² and 10-50 mm²
SE12.1 is for non tension copper to copper connections or for the connection of an earthing conductor. The connector is made of copper and the bolt is stainless steel.
AL 16-120 mm² and Al 16-35 mm²
SL9.11 is used for aluminium to aluminium connections. The connector has one bolt.
PAS/BLL-T 50-157 / 50-157 AlMgSi
The connector SLW25.22 is for non-tension aluminium to aluminium connections in MV up to 36 kV covered conductors without peeling the insulation. The connector is watertight by silicone greased teeth. The nominal insulation thickness of the conductor varies between 2.3-3.3 mm. Especially used with CC conductors. The connectors can be used with insulation cover SP16. Connector SLW25.22 is equipped with a shear head bolt.