Компактный распределитель-разъём

Linect T-block with one in (for a socket NAC32S.W) and one out (for a plug NAC31S.W). EnstoNet coding A - white. T-branch to be connected to the light fitting equipped with Linect screwless terminal block. Linect coding A - white.

The item is used in connecting a light fitting or other device to the network supplying it. Replaces the NAD3T.W T-connector if there is not enough space in the device for side locking latches. The counter coupling in the fitting is either NAC31H.W or NAS31H.W fitted in the device by the 3-pole narrow panel mounting adapter NK3PF.W. The T-connector is fed with a NAC32S.W coupler (or with an installation-ready cableset, where the NAC32S.W is coupled). The installation continues from the T-connector to the next device with a NAC31S.W (or with an installation-ready cableset, ...

Distribution block NAD36.B has one ingoing supply to which a socket is being connected and seven outgoing outputs to which plugs are being connected. Couplers that are to be connected are shown in the connection diagram. The distribution block can be fixed to e.g. a mounting plate with the mounting foot supplied with the distribution block using 4 screws, max. ø 4.2 mm. The distribution block does also partly fit into a min. 70 mm wide lighting track. In this case no separate mounting foot is needed.

The single-phase, continuous NGJKMF345 switchbox is designed for controlling lighting groups via two change over switches. The two six-pole switches can be used to control two single-phase lighting groups. In addition to the phase, zero and protective earth are connected to the switch, making it possible to connect the supply to a cleaning socket located next to a door frame via the switchbox.

The single-phase, continuous NGJKM335 switchbox is designed for the control of two single-phase lighting groups. With this switchbox, a single-phase supply is distributed to one lighting group via a five-pole switch. In addition to the phase, zero and protective earth are connected to the five-pole switch, and therefore the supply cleaning socket located next to a door frame can be connected via the switchbox.

The NGJKMF561 switchbox is designed for controlling a lighting group via push buttons. With this switchbox, power supply is branched into three push-button switches, which control an external relay, for example, in the central unit. Via the switchbox, the relay can control three lighting groups.

The item is used in connecting a light fitting or other device to the network supplying it. The T-connector has a 2,5 m long, halogen free, stranded cable. The free end of the cable is stripped, which will be wired to the connection coupler in the device. The T-connector is fed with a NAC32S.W -coupler (or with a prefabricated cableset). The installation continues from the T-connector to the next device with a NAC31S.W (or with an installation-ready cableset).

Fused T-distributors have a 2-pole switch (N, L) with a 5 x 20 mm fuse. Fused T-distributors come provided with 10 A fuse. The fuse drawer has space for a spare fuse and, if needed the fuse holder can be padlocked into an open position for secured isolation. The fused T-distributors also comes with a switch. The switch indicates if the power is on in the downwards going outlet. The switch is lit and has an O/I indicator.

T-distributors have one input and two outputs. The input is always located on the left side when looking at the connector mounted. The input is always connected to a female socket coupler and the outputs to male plug couplers. The T-distributor can be fixed to a wall or ceiling using max. Ø 5mm flat head screws or with cable ties.

T-distributors have one input and two outputs. The input is always located on the left side when looking at the connector mounted. The input is always connected to a female socket coupler and the outputs to male plug couplers. The T-distributor can be fixed to a wall or ceiling using max. Ø 5mm flat head screws or with cable ties.

T-distributors have one input and two outputs. The input is always located on the left side when looking at the connector mounted. The input is always connected to a female socket coupler and the outputs to male plug couplers. The T-distributor can be fixed to a wall or ceiling using max. Ø 5mm flat head screws or with cable ties.