Компактный распределитель-разъём

T-distributors have one input and two outputs. The input is always located on the left side when looking at the connector mounted. The input is always connected to a female socket coupler and the outputs to male plug couplers. The T-distributor can be fixed to a wall or ceiling using max. Ø 5mm flat head screws or with cable ties.

Distribution block with one in (for a socket) and three out (for plugs). The couplers to be connected to the distribution block are specified in the coupling illustration. If needed, the distribution block can be mounted to a base with two screws, max. ø 3,5 mm, distance between mounting holes 38 mm.

The item is used in connecting a light fitting or other device to the network supplying it. The T-connector is chosen according to the phase (L1, L2 or L3) the device is connected to. It has a 2,5 m long halogen free cable. The free end of the cable which will be wired to the connection coupler in the device is stranded. The T-connector is fed with a NAC52S.W -coupler (or with a prefabricated cableset). The installation continues from the T-connector to the next device with a NAC51S.W (or with a prefabricated cableset).

EnstoNet distributors can be used to replace conventional connection boxes in modular wiring installations. They are quick to install and ensure error free wiring connections.

EnstoNet distributors can be used to replace conventional connection boxes in modular wiring installations. They are quick to install and ensure error free wiring connections.

EnstoNet distributors can be used to replace conventional connection boxes in modular wiring installations. They are quick to install and ensure error free wiring connections.

EnstoNet distributors can be used to replace conventional connection boxes in modular wiring installations. They are quick to install and ensure error free wiring connections.

The item is used in connecting a light fitting or other device to the network supplying it. Replaces the NCD3T.G -T-connector if there is not enough space in the device for side locking latches. The counter coupling in the fitting is either NCC31H.G or NCS31H.G fitted in the device by the 3-pole narrow panel mounting adapter NK3PF.G. The T-connector is fed with a NCC32S.G -coupler (or with an installation-ready cableset, where the NCC32S.G is coupled). The installation continues from the T-connector to the next device with a NCC 31S.G (or with an installation-ready ...

The item is used in connecting a light fitting or other device to the network supplying it. The counter coupling in the fitting is either NBC31.S or NBS31.S fitted in the device by the panel mounting adapter NK3P.S. The T-connector is fed with a NAC32S.W -coupler (or with an installation-ready cableset, where the NAC32S.W is coupled). The installation continues from the T-connector to the next device with a NBC 31S.S (or with an installation-ready cableset, where the NBC 31S.S is coupled).

The item is used in connecting a light fitting or other device to the network supplying it. The counter coupling in the fitting is either NCC31.G or NCS31.G fitted in the device by the panel mounting adapter NK3P.G. The T-connector is fed with a NCC32S.G -coupler (or with an installation-ready cableset, where the NCC32S.G is coupled). The installation continues from the T-connector to the next device with a NCC 31S.G (or with an installation-ready cableset, where the NCC 31S.G is coupled).

Distribution block with one in (for a socket) and three out (for plugs). The couplers to be connected to the distribution block are specified in the coupling illustration. If needed, the distribution block can be mounted to a base with two screws, max. ø 3,5 mm, distance between mounting holes 58 mm.

Distribution block with one in (for a socket) and three out (for plugs). The couplers to be connected to the distribution block are specified in the coupling illustration. If needed, the distribution block can be mounted to a base with two screws, max. ø 3,5 mm, distance between mounting holes 38 mm.

The item is used in connecting a light fitting or other device to the network supplying it. Mounts to a ø 20 mm hole in the device with the M20 cable gland and a counter screw of the T-connector. The T-connector has 160 mm long, halogen free stranded wires, which will be wired to the connection coupler in the device. The T-connector is fed with a NBC32S.S -coupler (or with a prefabricated cableset). The installation continues from the T-connector to the next device with a NBC 31S.S (or with an installation-ready cableset).

Prefabricated cable sets are used for electrical installations in the buildings. Modular wiring solutions provide quick installation that is completely error free. Prefabricated cable products do not generate any waste at site.

Prefabricated cable sets are used for electrical installations in the buildings. Modular wiring solutions provide quick installation that is completely error free. Prefabricated cable products do not generate any waste at site.

EnstoNet distributors can be used to replace conventional connection boxes in modular wiring installations. They are quick to install and ensure error free wiring connections.