Компактный распределитель-разъём

The three-phase NGJKMV535 switchbox is designed for controlling two lighting groups. This continuous switchbox is equipped with an internal phase rotation and the supply is branched into outlets for two lighting groups via a five-pole switch. In addition to the phase, zero and protective earth are connected to the five-pole switch, and therefore the supply to a cleaning socket located next to a door frame can be connected via the switchbox.

The single-phase, continuous NGJRM32 relay box is designed for controlling a single-phase lighting group via a switch-controlled relay. In a serial installation, one of the switches may serve as the main switch, for example in a hotel room’s key card system.

The single-phase, continuous NGJRM33 relay box is designed for controlling two single-phase lighting groups via a relay controlled with the NGJFM335C relay box. This relay box can be connected directly to the RF box with an installation coupler. In some cases, the lighting load should be controlled via an auxiliary relay rather than with the RF receiver’s relay.

The NGJKM353.WG switchbox is designed for controlling a lighting system via bus control. The switchbox is equipped with a single-phase continuous supply. Three-pole inlet and outlet for bus-control switches or motion detectors. Power supply and control for a lighting group with five-pole grey couplers.

The NGJKMF341 switchbox is designed for use with change-over switches, such as in corridors. Its single-phase input and output are branched into two three-pole outlets for change-over switches and two supplies for lighting fixtures.

The 6-pole T-connector is used in connecting the operating voltage, the emergency light voltage and the control signal to the light fitting. The T-connector is fixed to the light fitting with a M20 cable gland and a counter screw. The operating voltage is supplied with three stranded 1,5 mm² connecting wires, the emergency light voltage with one stranded 1,5 mm² connecting wire and the control signal with two 1,5 mm² connecting wires. The length of the connecting wires is 250 mm. The T-connector is supplied assembled and equipped with NAC41H2.W, NAC42H2.W, NBC21H1.S and ...

The NGJDM633 T-connector is used in connecting the operating voltage and the control signal to the light fitting. The T-connector is fixed to the light fitting with a M20 cable gland and a counter screw. The operating voltage is supplied with three stranded 1,5 mm² connecting wires and the control signal with two 1,5 mm² connecting wires. The length of the connecting wires is 250 mm. The T-connector is supplied assembled and equipped with NAC31H2.W, NAC32H2.W, NBC31H1.S and NBC32H1.S -couplers. From the T-connector, the operating voltage and the control signal are ...

The NGJDM633S T-connector is used for connecting light fittings or other devices to a 6-pole circuit. The T-connectors have a 0,4 m cable drop which is connected to the fitting. NGJDM633S has a 5G1,0 cable drop and has apart from live earth and neutral, two wires for control signal in black and red. The T-connector is supplied pre-assembled with NAC31H2.W, NAC32H2.W, NBC31H1.S and NBC32H1.S connectors. The 6-pole T-connectors are connected to the circuit with cable sets that have to be ordered separately.

Equipped with black and white couplers, the three-phase distribution box NGJDM56.WB is a combination box for regular and UPS-secured power supply lines. With the distribution box, two separate inputs (white and black couplers) are branched into single-phase outlets L1, L2 and L3.

Prefabricated cable sets are used for electrical installations in the buildings. Modular wiring solutions provide quick installation that is completely error free. Prefabricated cable products do not generate any waste at site.

Equipped with black and white couplers, the single-phase distribution box NGJDM36.WB is a combination box for regular and UPS-secured power supply lines. With the distribution box, two separate inputs (white and black couplers) are branched into single-phase outlets.

With the switchbox, a continuous single-phase supply is branched into an outlet for a one-pole switch and one lighting group. The switchbox can be fixed to an installation plate with two ø 3–4 mm screws. The holes for screws are 75 mm apart.

The NGJKM346 switchbox is designed for controlling a lighting group via bus control. It is equipped with two three-pole outlets for bus-control push buttons or motion detectors. It provides power supply and control for two lighting groups with five-pole couplers.

T-distributors have one input and two outputs. The input is always located on the left side when looking at the connector mounted. The input is always connected to a female socket coupler and the outputs to male plug couplers. The T-distributor can be fixed to a wall or ceiling using max. Ø 5mm flat head screws or with cable ties.

T-distributors have one input and two outputs. The input is always located on the left side when looking at the connector mounted. The input is always connected to a female socket coupler and the outputs to male plug couplers. The T-distributor can be fixed to a wall or ceiling using max. Ø 5mm flat head screws or with cable ties.