Кабельные наконечники и соединители (гильзы)
13016 товаров
- Сортировка
- Вид каталога
Al 16-120 mm² / Al 16-120 mm²
SL4.25 is brushed and prepared with joint compound and so, only the conductors need brushing and greasing. SL4.25 is equipped with springs. Non tension aluminium to aluminium connector is equipped with two M8 bolts.
Al 16-150 mm² / Al 16-150 mm²
Non tension aluminium to aluminium LV and MV connections. The SL39.2 connector is suitable for AAC, AAAC and ACSR conductors. Equipped with two M8 bolts.
16-120 mm²
Branching of 1-3 out-going cables, max. Al 120 mm² with cover SP24 for insulated conductors up to 1000 VAC.
PAS/BLL-T 50-157 AlMgSi
Used as a live line branching connector for covered conductors. The connector is made of corrosion resistant aluminium and the bolts are of stainless steel. The connector is watertight by silicone greased teeth. For copper branch conductors, the sleeve PSS830 is needed. The installation can be made with a live line rod e.g. CT48.
MV CC 50-157 mm²
The watertight shear head bolt connector is for Medium Voltage Covered Conductors (MV CC) non-tension aluminium to aluminium connections without peeling the insulation. The nominal insulation thickness of the conductor can be between 2.3-4.0 mm.
Al 4x10-50 mm² / Cu 2.5-35 mm²
KE10.504N connector can be used for aluminum and copper conductors. Tightening torque is 10 Nm. Connectors are used either inside metal poles or in separate boxes.
Код поставщика
KE10.504N
Класс ETIM
EC000306 - Слаботочный соединитель (зажим кабельный)
Код РАЭК
1580491
Al 16-95 mm² and Cu 6-35 mm²
SM6.21 is equipped with springs made of stainless steel to make the installation easier. The connector has teeth in one groove, only.
Al 16-120 mm² and Al 16-95 mm²
The SL 9.22 connector is equipped with a threaded hole for a surge arrester.
Al 25-150 mm² / Al 25-150 mm²
SL30 is used with bare conductors as a branching connector. With PAS lines, the branching connector is installed to the live line stirrup. The connector is of corrosion resistant aluminium and the bolts of stainless steel. With Cu-branch conductor, the sleeve PSS830 is used. The installation can be made with the live line rod. Live-line clamp is used for branching the line or connecting / disconnecting the transformer live. In SL30 branching point is downwards.
PAS/BLL-T 150-241 AlMgSi, with temporary earthing horn
SEW21.3 is used as a temporary earthing connector where the arc protection devices SEW21.1 or SEW21.2 are not present. The connector SEW21.3 includes an arc protection horn suitable for use with temporary earthing devices with screw fixing. The connector has a place for an Al-thread, so it also works as an arc protection device. The connector is watertight by silicone greased teeth.
Al 4x10-35 mm² / Cu 1.5-25 mm²
KE10.1 connector can be used for aluminium and copper conductors. Tightening torque is 10 Nm. The connectors are used either inside metal poles or in separate boxes.
Код поставщика
KE10.1
Класс ETIM
EC000306 - Слаботочный соединитель (зажим кабельный)
Код РАЭК
1580487
Al 50-95, Cu 50-70 mm² ø 10.5 mm
The cable lugs are used for terminating conductors of up to 1 kV cables. Because of the shear head bolt construction no crimping tools are needed. The required torque is achieved by tightening the bolt until the head breaks off. The lugs are longitudinally water tight and they are suitable for both aluminium and copper conductors, solid and stranded as well as for sector shaped and circular conductors.
Код поставщика
LUG50-95/10LVTIN
Класс ETIM
EC001054 - Винтовой/болтовой кабельный наконечник
Код РАЭК
1580888
Al 95-185, Cu 95-150 mm² ø 12,5 mm
The cable lugs are used for terminating conductors of up to 1 kV cables. Because of the shear head bolt construction no crimping tools are needed. The required torque is achieved by tightening the bolt until the head breaks off. The lugs are longitudinally water tight and they are suitable for both aluminium and copper conductors, solid and stranded as well as for sector shaped and circular conductors.
Код поставщика
LUG95-185/12LVTIN
Класс ETIM
EC001054 - Винтовой/болтовой кабельный наконечник
Код РАЭК
1580892
Al 6-50, Cu 6-35 mm² ø 8.5 mm
The cable lugs are used for terminating conductors of up to 1 kV cables. Because of the shear head bolt construction no crimping tools are needed. The required torque is achieved by tightening the bolt until the head breaks off. The lugs are longitudinally water tight and they are suitable for both aluminium and copper conductors, solid and stranded as well as for sector shaped and circular conductors.
Код поставщика
LUG6-50/8LVTIN
Класс ETIM
EC001054 - Винтовой/болтовой кабельный наконечник
Код РАЭК
1580891
Al 25-150 mm² / Al 25-150 mm²
Live-line clamp is used for branching the line or connecting / disconnecting the transformer live. In SL30.1 the branching point is on the side of the connector.
Соединительный зажим для несущей нулевой жилы (MJPT 70 N)
Гильза соед. для нейтрали MJPT 70 N (ВК)
Код поставщика
21700841
Класс ETIM
EC001060 - Гильза соединительная обжимная для алюминиевых проводников
Код РАЭК
1138921
Соединительный зажим для проводов ввода (MJPB 6-10)
Код поставщика
21700701
Класс ETIM
EC001060 - Гильза соединительная обжимная для алюминиевых проводников
Код РАЭК
1198074
Соединительный зажим для проводов ввода (MJPB 10-10)
Код поставщика
21700711
Класс ETIM
EC001060 - Гильза соединительная обжимная для алюминиевых проводников
Код РАЭК
1198086
Соединительный зажим для проводов ввода (MJPB 6-6)
Код поставщика
21700691
Класс ETIM
EC001060 - Гильза соединительная обжимная для алюминиевых проводников
Код РАЭК
1198129
Зажим соединительный MJPT 95 NILED
Код поставщика
MJPT 95
Класс ETIM
EC001060 - Гильза соединительная обжимная для алюминиевых проводников
Код РАЭК
990288
Al 6-50, Cu 6-35 mm² ø 12,5 mm
The cable lugs are used for terminating conductors of up to 1 kV cables. Because of the shear head bolt construction no crimping tools are needed. The required torque is achieved by tightening the bolt until the head breaks off. The lugs are longitudinally water tight and they are suitable for both aluminium and copper conductors, solid and stranded as well as for sector shaped and circular conductors.
Код поставщика
LUG6-50/12LVTIN
Класс ETIM
EC001054 - Винтовой/болтовой кабельный наконечник
Код РАЭК
1580890
Гильза фазовая MJPT 54,6N
Код поставщика
MJPT 54,6 N
Класс ETIM
EC001060 - Гильза соединительная обжимная для алюминиевых проводников
Код РАЭК
990285
Гильза фазовая MJPT 50N
Код поставщика
MJPT 50 N
Класс ETIM
EC001060 - Гильза соединительная обжимная для алюминиевых проводников
Код РАЭК
990284
Гильза фазовая MJPT 35N
Код поставщика
MJPT 35 N
Класс ETIM
EC001060 - Гильза соединительная обжимная для алюминиевых проводников
Код РАЭК
990282
Гильза фазовая MJPT 70N
Код поставщика
MJPT 70 N
Класс ETIM
EC001060 - Гильза соединительная обжимная для алюминиевых проводников
Код РАЭК
990287
DKC Наконечник кабельный кольцевой с лопаткой под 90 град. для жилы 10кв.мм под болт М6 (ТМЛ-90)Наконечник кабельный кольцевой с лопаткой под 90 град. для жилы 10кв.мм под болт М6 (ТМЛ-90)
Код поставщика
2D76C
Класс ETIM
EC001051 - Наконечник кабельный трубчатый для медных проводников
Код РАЭК
2628084
DKC Наконечник с отверстием под винт и изолир.фланцем ПВХ, легкий ввод жилы, 1,5-2,5 кв.мм М3.5(д.3,7 мм) (НКИ)Наконечник с отверстием под винт и изолир.фланцем ПВХ, легкий ввод жилы, 1,5-2,5 кв.мм М3.5(д.3,7 мм) (НКИ)
Код поставщика
2B3P-EE-PVC
Класс ETIM
EC001052 - Наконечник кабельный под опрессовку для медных проводников
Код РАЭК
2320200
DKC Наконечник кабельный кольцевой с лопаткой под 90 град. для жилы 120кв.мм под болт М12 (ТМЛ-90)Наконечник кабельный кольцевой с лопаткой под 90 град. для жилы 120кв.мм под болт М12 (ТМЛ-90)
Код поставщика
2M712C
Класс ETIM
EC001051 - Наконечник кабельный трубчатый для медных проводников
Код РАЭК
2628086
DKC Наконечник кабельный кольцевой с лопаткой под 90 град. для жилы 35кв.мм под болт М8 (ТМЛ-90)Наконечник кабельный кольцевой с лопаткой под 90 град. для жилы 35кв.мм под болт М8 (ТМЛ-90)
Код поставщика
2G78C
Класс ETIM
EC001051 - Наконечник кабельный трубчатый для медных проводников
Код РАЭК
2632631