Кабельные наконечники и соединители (гильзы)
119 товаров
- Сортировка
- Вид каталога
Al/Cu 6-50 mm² ø 13 mm
The cable lugs are used for terminating conductors of up to 1 kV cables. Because of the shear head bolt construction no crimping tools are needed. The required torque is achieved by tightening the bolt until it breaks off. The lugs are longitudinally water tight and they are suitable both for aluminium and copper conductors, solid and stranded, sector shaped and circular.
Код поставщика
SAL1.272
Класс ETIM
EC001054 - Винтовой/болтовой кабельный наконечник
Код РАЭК
1583406
Бренд
4x1.5-25 mm² Cu and 4x10-35 mm² Al, multitap
Multitap connectors is specially designed for use with universal piercing connectors e.g. SL11.118 and SLIP22.1 up to 1000 V a.c. to facilitate several out-going conductors. Each branch conductor can be connected with a separate screw.
Al 150-300, Cu 150-240 mm² ø 12,5 mm
The cable lugs are used for terminating conductors of up to 1 kV cables. Because of the shear head bolt construction no crimping tools are needed. The required torque is achieved by tightening the bolt until the head breaks off. The lugs are longitudinally water tight and they are suitable for both aluminium and copper conductors, solid and stranded as well as for sector shaped and circular conductors.
Код поставщика
LUG150-300/12LVTIN
Класс ETIM
EC001054 - Винтовой/болтовой кабельный наконечник
Код РАЭК
1580886
Бренд
Al 150-300, Cu 150-240 mm² ø 16,5 mm
The cable lugs are used for terminating conductors of up to 1 kV cables. Because of the shear head bolt construction no crimping tools are needed. The required torque is achieved by tightening the bolt until the head breaks off. The lugs are longitudinally water tight and they are suitable for both aluminium and copper conductors, solid and stranded as well as for sector shaped and circular conductors.
Код поставщика
LUG150-300/16LVTIN
Класс ETIM
EC001054 - Винтовой/болтовой кабельный наконечник
Код РАЭК
1580887
Бренд
10-50 mm² / 1.5-10 mm², Waterproof
SLIW50 is for use with insulated aluminium or copper conductors. Fully insulated bolt provides safe live line working. Both main and branch conductor insulations are pierced by single bolt action. Test voltage 6 kV/50 Hz/1 min in water. Connector's design enables hot line installation without peeling insulation from conductor.
Al/Cu 16-95 mm² / 2.5-25 mm²
SLIW63 is for all connections of uninsulated aluminium and copper main and insulated branch conductors up to 1000 V AC. Equipped with shear head screw.
Al/Cu 16-95 mm² / 16-95 mm²
SLIW64 is for all connections of uninsulated aluminium and copper main and insulated branch conductors up to 1000 V AC. Equipped with shear head screw.
With plain horn, PAS/BLL-T 50-157 mm² AlMgSi
The connector SEW20.1 includes an arc protection horn and is used for arc protection for covered conductors. The connector is watertight by silicone greased teeth.
CC Al 50-157 / Bare Al 35-157 mm²
The connector SEW20.7 can be used for medium voltage covered conductor to bare conductor connections. The connector is watertight by silicone greased teeth.
Al 50-240 mm² / Cu 10-95 mm²
SM4.21 is for non tension aluminium to copper connections. As the upper section of the connector is divided, two copper branch conductors with different diameters can be connected to the aluminium main conductor. The connectors are brushed and prepared with joint compound, thus only the conductors need brushing and greasing. Equipped with two M10 bolts.
Al 50-240 mm² / Al 50-240 mm²
SL8.21 connector is brushed and prepared with joint compound and so, only the conductors need brushing and greasing. For non tension aluminium to aluminium connections. Equipped with two M10 bolts.
Al 16-120 mm² / Al 16-120 mm²
SL4.25 is brushed and prepared with joint compound and so, only the conductors need brushing and greasing. SL4.25 is equipped with springs. Non tension aluminium to aluminium connector is equipped with two M8 bolts.
Al 16-150 mm² / Al 16-150 mm²
Non tension aluminium to aluminium LV and MV connections. The SL39.2 connector is suitable for AAC, AAAC and ACSR conductors. Equipped with two M8 bolts.
16-120 mm²
Branching of 1-3 out-going cables, max. Al 120 mm² with cover SP24 for insulated conductors up to 1000 VAC.
PAS/BLL-T 50-157 AlMgSi
Used as a live line branching connector for covered conductors. The connector is made of corrosion resistant aluminium and the bolts are of stainless steel. The connector is watertight by silicone greased teeth. For copper branch conductors, the sleeve PSS830 is needed. The installation can be made with a live line rod e.g. CT48.
MV CC 50-157 mm²
The watertight shear head bolt connector is for Medium Voltage Covered Conductors (MV CC) non-tension aluminium to aluminium connections without peeling the insulation. The nominal insulation thickness of the conductor can be between 2.3-4.0 mm.
Al 4x10-50 mm² / Cu 2.5-35 mm²
KE10.504N connector can be used for aluminum and copper conductors. Tightening torque is 10 Nm. Connectors are used either inside metal poles or in separate boxes.
Код поставщика
KE10.504N
Класс ETIM
EC000306 - Слаботочный соединитель (зажим кабельный)
Код РАЭК
1580491
Бренд
Al 16-95 mm² and Cu 6-35 mm²
SM6.21 is equipped with springs made of stainless steel to make the installation easier. The connector has teeth in one groove, only.
Al 16-120 mm² and Al 16-95 mm²
The SL 9.22 connector is equipped with a threaded hole for a surge arrester.
Al 25-150 mm² / Al 25-150 mm²
SL30 is used with bare conductors as a branching connector. With PAS lines, the branching connector is installed to the live line stirrup. The connector is of corrosion resistant aluminium and the bolts of stainless steel. With Cu-branch conductor, the sleeve PSS830 is used. The installation can be made with the live line rod. Live-line clamp is used for branching the line or connecting / disconnecting the transformer live. In SL30 branching point is downwards.
PAS/BLL-T 150-241 AlMgSi, with temporary earthing horn
SEW21.3 is used as a temporary earthing connector where the arc protection devices SEW21.1 or SEW21.2 are not present. The connector SEW21.3 includes an arc protection horn suitable for use with temporary earthing devices with screw fixing. The connector has a place for an Al-thread, so it also works as an arc protection device. The connector is watertight by silicone greased teeth.
Al 6x10-50 mm² / Cu 2.5-35 mm²
KE10.506 connectors can be used for aluminium and copper conductors. Tightening torque is 10 Nm. The connectors are used either inside metal poles or in separate boxes.
Код поставщика
KE10.506
Класс ETIM
EC000306 - Слаботочный соединитель (зажим кабельный)
Код РАЭК
1580492
Бренд
Al 4x10-35 mm² / Cu 1.5-25 mm²
KE10.1 connector can be used for aluminium and copper conductors. Tightening torque is 10 Nm. The connectors are used either inside metal poles or in separate boxes.
Код поставщика
KE10.1
Класс ETIM
EC000306 - Слаботочный соединитель (зажим кабельный)
Код РАЭК
1580487
Бренд
Al 50-95, Cu 50-70 mm² ø 10.5 mm
The cable lugs are used for terminating conductors of up to 1 kV cables. Because of the shear head bolt construction no crimping tools are needed. The required torque is achieved by tightening the bolt until the head breaks off. The lugs are longitudinally water tight and they are suitable for both aluminium and copper conductors, solid and stranded as well as for sector shaped and circular conductors.
Код поставщика
LUG50-95/10LVTIN
Класс ETIM
EC001054 - Винтовой/болтовой кабельный наконечник
Код РАЭК
1580888
Бренд
Al 95-185, Cu 95-150 mm² ø 12,5 mm
The cable lugs are used for terminating conductors of up to 1 kV cables. Because of the shear head bolt construction no crimping tools are needed. The required torque is achieved by tightening the bolt until the head breaks off. The lugs are longitudinally water tight and they are suitable for both aluminium and copper conductors, solid and stranded as well as for sector shaped and circular conductors.
Код поставщика
LUG95-185/12LVTIN
Класс ETIM
EC001054 - Винтовой/болтовой кабельный наконечник
Код РАЭК
1580892
Бренд
Al 6-50, Cu 6-35 mm² ø 8.5 mm
The cable lugs are used for terminating conductors of up to 1 kV cables. Because of the shear head bolt construction no crimping tools are needed. The required torque is achieved by tightening the bolt until the head breaks off. The lugs are longitudinally water tight and they are suitable for both aluminium and copper conductors, solid and stranded as well as for sector shaped and circular conductors.
Код поставщика
LUG6-50/8LVTIN
Класс ETIM
EC001054 - Винтовой/болтовой кабельный наконечник
Код РАЭК
1580891
Бренд
Al 25-150 mm² / Al 25-150 mm²
Live-line clamp is used for branching the line or connecting / disconnecting the transformer live. In SL30.1 the branching point is on the side of the connector.
Al 6-50, Cu 6-35 mm² ø 12,5 mm
The cable lugs are used for terminating conductors of up to 1 kV cables. Because of the shear head bolt construction no crimping tools are needed. The required torque is achieved by tightening the bolt until the head breaks off. The lugs are longitudinally water tight and they are suitable for both aluminium and copper conductors, solid and stranded as well as for sector shaped and circular conductors.
Код поставщика
LUG6-50/12LVTIN
Класс ETIM
EC001054 - Винтовой/болтовой кабельный наконечник
Код РАЭК
1580890
Бренд