Устройства защиты и безопасности
26 товаров
- Сортировка
- Вид каталога
Length 1 m
Pole fuse switches can be operated from the ground by using this operating rod.
2 m / 1.3 m
Pole fuse switches can be operated from the ground by using the operating rod ST33.
sectional spliced 6 -feet, Hastings 81-706
With the stick CT48.64, you can snap on any length requirement. Ideal for extra long reach in substations. Unsurpassed for Trouble Shooters.
Universal fitting
The spray can holder has a universal fitting and it is a versatile model. The holder can be used at any angle. Supplied with a 30 feet rope.
1/2" dia. x 34" L
Insulator link for rope. Tested at 100 kV per foot for 5 minutes. All braided ropes trap moisture.
Adjustable 90°
Mounted on universal sticks, the adapter allows fittings to be set at almost any angle to the stick.
16'
The triangle shape of the rod enables each section to lock in automatically. The rod is versatile in usage, for example, a 40 ft. tool can be reduced to a 20 ft. working height by depressing the lock button and sliding the bottom sections off. No tools are required for disassembly.
Wet or dry
This easy-to-use tester tests wet and dry hot sticks. The tester meets OSHA 1910.269 for testing "in service" tools (wet test) and new tools (dry test). The tester has a selector switch for wet or dry and a dual range scale which gives the operator leakage values in micro amps. Hot stick tester comes with a carrying/storage case and a test bar.
up to 14 tools
Tool racks are made of fiberglass components. Tool racks will accommodate up to 14 hot line tools. Tool rack's support legs collapse for easy storage and transportation.
Устройство заземления SE 41
Код поставщика
SE41
Класс ETIM
EC002788 - Устройство для заземления и закорачивания
Код РАЭК
1010499
24.7 feet max. length
With the stick CT48.64, you can snap on any length requirement. Ideal for extra long reach in substations. Unsurpassed for Trouble Shooters. 6 feet, 4 sections, 7', 13', 19', 25'
Plastic wedge for LV ABC
During the installation of connectors, the phase conductors of an insulated twisted overhead cable can be separated by using the wedge ST192. The wedge can be used when installing suspension clamps.
Shotgun ext. section , 4 FT
The extension is used with single section sticks to make up longer lengths.
For hotline sticks
The kit includes 20 ultra fine non-metallic pads (4 1/2 inches x 6 1/2 inches).
For telescope rod CT60.50
Spark protection plate for telescope rod CT60.50.
11 - 33 kV, for hexagonal sticks
IEC electronic voltage detectors for indoor and outdoor use.
Universal adapter
The adapter adapts shotgun sticks to all universal attachments. Can be used with all standard brand tools. The adapter is made of bronze alloy.
1"x8'
For holding slack conductors during sleeving. Provides positive control for shaping and bending jumpers and bush wires. Excellent means of applying factory formed tie wires, armor rods, and securing captured hardware during crimping operation.
Insulated ratchet cutters 10'
For cutting ACSR and Soft Wire Conductors. Overhead or underground. The cutter cuts clean, which means that it leaves no burrs.
350 mm - 1200 mm, 270-AL-R050-A
This drum stand has axel height from 350 to 1200 mm. The stand chassis is made out of hot dip galvanized steel pipe. Due to wide range in axel height settings, almost all cable drums are compatible with this model. During the reeling, all hydraulics must be turned off. The drum stands are delivered without axels.
For 400 V lines
The direction of rotation of the three-phase system can be determined without peeling the conductor insulation. Safe for direct connections to live lines. Displays a missing phase, suitable for determining phase difference. Watertight construction. Carrying case included.
Товары 1 - 26 из 26