Ручной инструмент общего назначения
56 товаров
- Сортировка
- Вид каталога
Cable pulling through wheel for underground cable
Cable pulling through wheel for underground cables.
Код поставщика
ST157
Класс ETIM
EC003007 - Аксессуары для устройств прокладки кабеля
Код РАЭК
1584051
cable groove 10 mm
Swivels are essential for effective pulling operation of underground cables and overhead conductors.
The swivels are fitted with bearings to prevent build up of twist and loops in the cable or pulling rope.
Код поставщика
CT104
Класс ETIM
EC003007 - Аксессуары для устройств прокладки кабеля
Код РАЭК
1579899
with chain attachment, double pulley
Sahlins 6822-0000
Код поставщика
ST238
Класс ETIM
EC003007 - Аксессуары для устройств прокладки кабеля
Код РАЭК
1584066
Сменное лезвие для устройства зачистки проводов EnstoSpare blade for ST250
ST250.1 spare blade for ST250
Blade angle is 17 degrees
Cумка/карман для инструментов пластик EnstoC-30
Single Pocket Carrying Case. Water Repellent. Snap Top.
Код поставщика
CT11.490
Класс ETIM
EC000181 - Ящик/ сумка/ кейс/ жилет для инструментов
Код РАЭК
1579903
V -hand brush
All brushes have stainless steel bristles to allow the cleanest connection possible. Stainless steel eliminates rust deterioration of bristles.
Pulley with one wheel
Is used for stringing the conductor on porcelain insulators.
Код поставщика
ST168
Класс ETIM
EC003007 - Аксессуары для устройств прокладки кабеля
Код РАЭК
1584052
Cумка/карман для инструментов кожа EnstoCarrying case for ST18
ST18.2 is a carrying case for ST18.
Код поставщика
ST18.2
Класс ETIM
EC000181 - Ящик/ сумка/ кейс/ жилет для инструментов
Код РАЭК
1584056
Cable jointing stand
ST277 cable joint stand is designed for jointing cables. With the locking mechanism the cable ends stay in place during cable preparation and makes the jointing easier.
The width and height of ST277 can be adjusted according to need. The frame is galvanized steel and can be disassembled to ease transport and storage.
12 - 60 Nm
For tightening connectors and fittings with standard sockets. With aluminium connectors, it is essential that the bolts are tightened by using the correct torque. ST30 is a high quality adjustable wrench with a wide torque range. The read-outs are given in Nm and lbs.-ft. Socket adaptor mount 1/2".
Код поставщика
ST30
Класс ETIM
EC002132 - Динамометрический/моментный гаечный ключ/отвертка
Код РАЭК
1584080
Cable groove 50 mm, nylon, with chain attachment
Stringing wheel ST26.11 is for straight line sections and inside line angles. Sheaf is made of nylon and frame of galvanized steel. By using chain attachment, the wheel can be hung at desired height and cable can be pulled out. Breaking load is 8.4 kN in direction of pole and 14.6 kN vertically to pole.
Код поставщика
ST26.11
Класс ETIM
EC003007 - Аксессуары для устройств прокладки кабеля
Код РАЭК
1584070
Double-sided, 13 mm / 17 mm
For installation of connectors and suspension fittings.
Cable groove 77 mm, aluminium
Stringing wheel for straight line sections. Sheave is made of aluminium alloy and frame of galvanized steel. In dimensioning the frame, the conductor attachment beside the clamp has been taken into account. The wheel hooks are dimensioned so that they are suitable for hanging on RKKP and RKKUH hooks.
Код поставщика
ST26.33
Класс ETIM
EC003007 - Аксессуары для устройств прокладки кабеля
Код РАЭК
1584072
Light cable roller width of roll 180 mm for UG cable
Steel tube frame is fixed on a steel plate. Because of the base plate, the centre of gravity is low. The base plate is furnished with holes and so it is easy to fasten with nails to boards etc. The frame is painted. The rolls are of aluminium alloy and equipped with sealed ball bearings.
Код поставщика
ST156
Класс ETIM
EC003007 - Аксессуары для устройств прокладки кабеля
Код РАЭК
1584050
Ящик для инструментов кожа/металл Ensto2 t
For mechanical tension adjustment of overhead lines and insulated conductors. Lightweight and compact. The dynamometer has a built-in measuring dial with scales according to the maximum load. Eyelet 16 mm.
Код поставщика
ST112.2
Класс ETIM
EC000181 - Ящик/ сумка/ кейс/ жилет для инструментов
Код РАЭК
1584041
10-20 mm, plastic
For pulling of bare and covered conductors in overhead lines through rollers and pulley fittings. The stockings are manufactured of high strength, parallel stranded fibers and they have a polyethylene sheath. The plastic material is non-conductive, non-corrosive and abrasion resistant. The construction is made to prevent damage to other equipment during the pulling operation. Grip length is 1000 mm.
10-20 mm, metal
For pulling of bare and covered conductors in overhead lines through rollers and pulley fittings. The stockings are manufactured of high strength, parallel stranded fibers and they have a polyethylene sheath. The plastic material is non-conductive, non-corrosive and abrasion resistant. The construction is made to prevent damage to other equipment during the pulling operation. Grip length is 1000 mm.
Cable groove diameter 50 mm, nylon with chain attachment, double pulley
Stringing wheel with two sheaves for angle poles. Sheaves are made of nylon and frame of galvanized steel. The frame solution of stringing wheel makes it possible to pull cable around corners. Chain attachment is simple and quick. In placing the sheaves, the necessary dimensions are to be taken into account when moving the cable to clamp. Distance between the shafts of sheaves is 200 mm. Breaking load is 6 kN in direction of the pole and 24 kN vertically to pole.
Код поставщика
ST26.22
Класс ETIM
EC003007 - Аксессуары для устройств прокладки кабеля
Код РАЭК
1584071