Инструмент, измерительные приборы и средства защиты
105 товаров
- Сортировка
- Вид каталога
with chain attachment, double pulley
Sahlins 6822-0000
Код поставщика
ST238
Класс ETIM
EC003007 - Аксессуары для устройств прокладки кабеля
Код РАЭК
1584066
Сменное лезвие для устройства зачистки проводов EnstoSpare blade for ST250
ST250.1 spare blade for ST250
Blade angle is 17 degrees
Cумка/карман для инструментов пластик EnstoC-30
Single Pocket Carrying Case. Water Repellent. Snap Top.
Код поставщика
CT11.490
Класс ETIM
EC000181 - Ящик/ сумка/ кейс/ жилет для инструментов
Код РАЭК
1579903
Shotgun ext. section , 4 FT
The extension is used with single section sticks to make up longer lengths.
For hotline sticks
The kit includes 20 ultra fine non-metallic pads (4 1/2 inches x 6 1/2 inches).
For telescope rod CT60.50
Spark protection plate for telescope rod CT60.50.
V -hand brush
All brushes have stainless steel bristles to allow the cleanest connection possible. Stainless steel eliminates rust deterioration of bristles.
11 - 33 kV, for hexagonal sticks
IEC electronic voltage detectors for indoor and outdoor use.
Universal adapter
The adapter adapts shotgun sticks to all universal attachments. Can be used with all standard brand tools. The adapter is made of bronze alloy.
1"x8'
For holding slack conductors during sleeving. Provides positive control for shaping and bending jumpers and bush wires. Excellent means of applying factory formed tie wires, armor rods, and securing captured hardware during crimping operation.
Pulley with one wheel
Is used for stringing the conductor on porcelain insulators.
Код поставщика
ST168
Класс ETIM
EC003007 - Аксессуары для устройств прокладки кабеля
Код РАЭК
1584052
Insulated ratchet cutters 10'
For cutting ACSR and Soft Wire Conductors. Overhead or underground. The cutter cuts clean, which means that it leaves no burrs.
Cумка/карман для инструментов кожа EnstoCarrying case for ST18
ST18.2 is a carrying case for ST18.
Код поставщика
ST18.2
Класс ETIM
EC000181 - Ящик/ сумка/ кейс/ жилет для инструментов
Код РАЭК
1584056
ECO920 NTC-sensor 10kohm 6 m
Ground sensor, humidity and heat
Cable jointing stand
ST277 cable joint stand is designed for jointing cables. With the locking mechanism the cable ends stay in place during cable preparation and makes the jointing easier.
The width and height of ST277 can be adjusted according to need. The frame is galvanized steel and can be disassembled to ease transport and storage.
12 - 60 Nm
For tightening connectors and fittings with standard sockets. With aluminium connectors, it is essential that the bolts are tightened by using the correct torque. ST30 is a high quality adjustable wrench with a wide torque range. The read-outs are given in Nm and lbs.-ft. Socket adaptor mount 1/2".
Код поставщика
ST30
Класс ETIM
EC002132 - Динамометрический/моментный гаечный ключ/отвертка
Код РАЭК
1584080
Cable groove 50 mm, nylon, with chain attachment
Stringing wheel ST26.11 is for straight line sections and inside line angles. Sheaf is made of nylon and frame of galvanized steel. By using chain attachment, the wheel can be hung at desired height and cable can be pulled out. Breaking load is 8.4 kN in direction of pole and 14.6 kN vertically to pole.
Код поставщика
ST26.11
Класс ETIM
EC003007 - Аксессуары для устройств прокладки кабеля
Код РАЭК
1584070
Double-sided, 13 mm / 17 mm
For installation of connectors and suspension fittings.
Cable groove 77 mm, aluminium
Stringing wheel for straight line sections. Sheave is made of aluminium alloy and frame of galvanized steel. In dimensioning the frame, the conductor attachment beside the clamp has been taken into account. The wheel hooks are dimensioned so that they are suitable for hanging on RKKP and RKKUH hooks.
Код поставщика
ST26.33
Класс ETIM
EC003007 - Аксессуары для устройств прокладки кабеля
Код РАЭК
1584072