Разъемы
1435 товаров
- Сортировка
- Вид каталога
Штеккерный шнур (патч-корд) 5000мм 5-пол 16А 250В IP20 EnstoWhite, 5,0 m, L2 connected
Prefabricated cable sets are used for electrical installations in the buildings. Modular wiring solutions provide quick installation that is completely error free. Prefabricated cable products do not generate any waste at site.
Код поставщика
NAL512M25050
Класс ETIM
EC002587 - Штеккерный шнур (патч-корд) для коммутации устройств в зданиях
Код РАЭК
1581615
Штеккерный шнур (патч-корд) 10000мм 3-пол 16А 250В IP20 EnstoBlue, 10,0 m
Prefabricated cable sets are used for electrical installations in the buildings. Modular wiring solutions provide quick installation that is completely error free. Prefabricated cable products do not generate any waste at site.
Код поставщика
NBL330N15100S
Класс ETIM
EC002587 - Штеккерный шнур (патч-корд) для коммутации устройств в зданиях
Код РАЭК
1582001
Штеккерный шнур (патч-корд) 6000мм 3-пол 16А 250В IP20 EnstoBlue, 6,0 m
Prefabricated cable sets are used for electrical installations in the buildings. Modular wiring solutions provide quick installation that is completely error free. Prefabricated cable products do not generate any waste at site.
Код поставщика
NBL330N15060S
Класс ETIM
EC002587 - Штеккерный шнур (патч-корд) для коммутации устройств в зданиях
Код РАЭК
1582000
5-pole socket, horizontal, blue (A, B, C, D, E)
Printed circuit board couplers are designed for internal connections in the device. The range includes models for both horizontal and vertical mounting.
Код поставщика
NBE52H.S
Класс ETIM
EC002566 - Приборный штекерный разъём для подключения в зданиях
Код РАЭК
1581897
2-pole socket, horizontal, latch only on the left side, grey (a+, b-)
Printed circuit board couplers are designed for internal connections in the device. The range includes models for both horizontal and vertical mounting.
Код поставщика
NCE22HH1.G
Класс ETIM
EC002566 - Приборный штекерный разъём для подключения в зданиях
Код РАЭК
1582109
3-pole plug, horizontal, grey (a+, PE, b-)
Printed circuit board couplers are designed for internal connections in the device. The range includes models for both horizontal and vertical mounting.
Код поставщика
NCE31H.G
Класс ETIM
EC002566 - Приборный штекерный разъём для подключения в зданиях
Код РАЭК
1582111
2-pole socket, horizontal, grey (a+, b-)
Printed circuit board couplers are designed for internal connections in the device. The range includes models for both horizontal and vertical mounting.
Код поставщика
NCE22H.G
Класс ETIM
EC002566 - Приборный штекерный разъём для подключения в зданиях
Код РАЭК
1582108
3-pole plug, vertical, red (1, PE, N)
Printed circuit board couplers are designed for internal connections in the device. The range includes models for both horizontal and vertical mounting.
Код поставщика
NCE31V.P
Класс ETIM
EC002566 - Приборный штекерный разъём для подключения в зданиях
Код РАЭК
1582114
5-pole socket, vertical, blue (A, B, C, D, E)
Printed circuit board couplers are designed for internal connections in the device. The range includes models for both horizontal and vertical mounting.
Код поставщика
NBE52V.S
Класс ETIM
EC002566 - Приборный штекерный разъём для подключения в зданиях
Код РАЭК
1581898
2-pole socket, vertical, grey (a+, b-)
Printed circuit board couplers are designed for internal connections in the device. The range includes models for both horizontal and vertical mounting.
Код поставщика
NCE22V.G
Класс ETIM
EC002566 - Приборный штекерный разъём для подключения в зданиях
Код РАЭК
1582110
Blue (A, B, C)
Код поставщика
NBS31.S
Класс ETIM
EC002566 - Приборный штекерный разъём для подключения в зданиях
Код РАЭК
1582064
Blue (A, B)
Код поставщика
NBS22.S
Класс ETIM
EC002566 - Приборный штекерный разъём для подключения в зданиях
Код РАЭК
1582063
ENSTO 3-х полюсный Т-соединительный блок3-х полюсный Т-соединительный блок
The item is used in connecting a light fitting or other device to the network supplying it. The counter coupling in the fitting is either NAC31.W or NAS31.W fitted in the device by the panel mounting adapter NK3P.W. The T-connector is fed with a NAC32S.W -coupler (or with an installation-ready cableset, where the NAC32S.W is coupled). The installation continues from the T-connector to the next device with a NAC 31S.W (or with an installation-ready cableset, where the NAC 31S.W is coupled).
ENSTO T-распределительный блок, белыйT-распределительный блок, белый
The item is used in connecting a light fitting or other device to the network supplying it. The counter coupling in the fitting is either NAC51.W or NAS51.W fitted in the device by the panel mounting adapter NK5P.W. The T-connector is fed with a NAC52S.W -coupler (or with an installation-ready cableset, where the NAC52S.W is coupled). The installation continues from the T-connector to the next device with a NAC51S.W (or with an installation-ready cableset, where the NAC51S.W is coupled).
ENSTO 2-х полюсный распределительный блок2-х полюсный распределительный блок
Distribution block with one in (for a socket) and three out (for plugs). The couplers to be connected to the distribution block are specified in the coupling illustration. If needed, the distribution block can be mounted to a base with two screws, max. ø 3,5 mm, distance between mounting holes 28 mm.
ENSTO 3-х полюсный распред. блок/черный3-х полюсный распред. блок/черный
Distribution block with one in (for a socket) and three out (for plugs). The couplers to be connected to the distribution block are specified in the coupling illustration. If needed, the distribution block can be mounted to a base with two screws, max. ø 3,5 mm, distance between mounting holes 38 mm.
ENSTO 3-х полюсный T-распред. блок/белый3-х полюсный T-распред. блок/белый
The item is used in connecting a light fitting or other device to the network supplying it. Mounts to a ø 20 mm hole in the device with the M20 cable gland and a counter screw of the T-connector. The T-connector has 160 mm long, halogen free stranded wires, which will be wired to the connection coupler in the device. The T-connector is fed with a NAC32S.W -coupler (or with a prefabricated cableset). The installation continues from the T-connector to the next device with a NAC 31S.W (or with an installation-ready cableset).
Red
Distribution block NCD36.P has one ingoing supply to which a socket is being connected and seven outgoing outputs to which plugs are being connected. Couplers that are to be connected are shown in the connection diagram.
The distribution block can be fixed to e.g. a mounting plate with the mounting foot supplied with the distribution block using 4 screws, max. ø 4.2 mm. The distribution block does also partly fit into a min. 70 mm wide lighting track. In this case no separate mounting foot is needed.
Red, narrow drop, without latches
The item is used in connecting a light fitting or other device to the network supplying it. Replaces the NCD3T.P -T-connector if there is not enough space in the device for side locking latches. The counter coupling in the fitting is either NCC31H.P or NCS31H.P fitted in the device by the 3-pole narrow panel mounting adapter NK3PF.P. The T-connector is fed with a NCC32S.P -coupler. The installation continues from the T-connector to the next device with a NCC 31S.P.
Red
The item is used in connecting a light fitting or other device to the network supplying it. The counter coupling in the fitting is either NCC31.P or NCS31.P fitted in the device by the panel mounting adapter NK3P.P. The T-connector is fed with a NCC32S.P-coupler (or with an installation-ready cable set, where the NCC32S.P is coupled). The installation continues from the T-connector to the next device with coupler NCC31S.P (or with an installation-ready cable set, where the NCC31S.P is coupled).
Grey
Distribution block NCD36.G has one ingoing supply to which a socket is being connected and seven outgoing outputs to which plugs are being connected. Couplers that are to be connected are shown in the connection diagram.
The distribution block can be fixed to e.g. a mounting plate with the mounting foot supplied with the distribution block using 4 screws, max. ø 4.2 mm. The distribution block does also partly fit into a min. 70 mm wide lighting track. In this case no separate mounting foot is needed.
Red
Distribution block with one in (for a socket) and three out (for plugs). The couplers to be connected to the distribution block are specified in the coupling illustration. If needed, the distribution block can be mounted to a base with two screws, max. ø 3,5 mm, distance between mounting holes 58 mm.
Red
Distribution block with one in (for a socket) and three out (for plugs). The couplers to be connected to the distribution block are specified in the coupling illustration. If needed, the distribution block can be mounted to a base with two screws, max. ø 3,5 mm, distance between mounting holes 38 mm.
Grey
Distribution block with one in (for a socket) and three out (for plugs). The couplers to be connected to the distribution block are specified in the coupling illustration. If needed, the distribution block can be mounted to a base with two screws, max. ø 3,5 mm, distance between mounting holes 58 mm.
Grey
Distribution block with one in (for a socket) and three out (for plugs). The couplers to be connected to the distribution block are specified in the coupling illustration. If needed, the distribution block can be mounted to a base with two screws, max. ø 3,5 mm, distance between mounting holes 28 mm.
Blue, B (brown), C (Earth), D (blue) connected
EnstoNet distributors can be used to replace conventional connection boxes in modular wiring installations. They are quick to install and ensure error free wiring connections.
Штеккерный шнур (патч-корд) 8000мм 5-пол 16А 250В IP20 EnstoWhite, 8,0 m
Prefabricated cable sets are used for electrical installations in the buildings. Modular wiring solutions provide quick installation that is completely error free. Prefabricated cable products do not generate any waste at site.
Код поставщика
NAL510M15080
Класс ETIM
EC002587 - Штеккерный шнур (патч-корд) для коммутации устройств в зданиях
Код РАЭК
1581495
Штеккерный шнур (патч-корд) 10000мм 5-пол 16А 250В IP20 EnstoWhite, 10,0 m
Prefabricated cable sets are used for electrical installations in the buildings. Modular wiring solutions provide quick installation that is completely error free. Prefabricated cable products do not generate any waste at site.
Код поставщика
NAL510M25100
Класс ETIM
EC002587 - Штеккерный шнур (патч-корд) для коммутации устройств в зданиях
Код РАЭК
1581503
Штеккерный шнур (патч-корд) 6000мм 5-пол 16А 250В IP20 EnstoWhite, 6,0 m
Prefabricated cable sets are used for electrical installations in the buildings. Modular wiring solutions provide quick installation that is completely error free. Prefabricated cable products do not generate any waste at site.
Код поставщика
NAL510M25060
Класс ETIM
EC002587 - Штеккерный шнур (патч-корд) для коммутации устройств в зданиях
Код РАЭК
1581501
Штеккерный шнур (патч-корд) 8000мм 5-пол 16А 250В IP20 EnstoWhite, 8,0 m
Prefabricated cable sets are used for electrical installations in the buildings. Modular wiring solutions provide quick installation that is completely error free. Prefabricated cable products do not generate any waste at site.
Код поставщика
NAL510M25080
Класс ETIM
EC002587 - Штеккерный шнур (патч-корд) для коммутации устройств в зданиях
Код РАЭК
1581502