Аксессуары для внутренней электроустановки здания

Separate strain-relief for 4 mm² cables with diameter Ø 12 - 17,5 mm. The strain-relief can be used with plug and socket couplers. Weight 23 g. It is not allowed to sell or use this product in Germany.

Protective cover accessory for socket outlet boxes.

End cap is suitable for all EnstoNet XL couplers. When using EnstoNet XL installation couplers in readily accessible areas (IP2XD), end cap is used for unused installation socket connectors. Theend cap can be opened only with the aid of a tool.

Strain-reliefs are suitable for all EnstoNet XL couplers. There are four types of strain relief accommodating two types of cable diameter and two types of metal conduit diameters. Note that not all metal conduits are the same and checks should be made to ensure the profile is correct before ordering.

Strain-reliefs are suitable for all EnstoNet XL couplers. There are four types of strain relief accommodating two types of cable diameter and two types of metal conduit diameters. Note that not all metal conduits are the same and checks should be made to ensure the profile is correct before ordering.

The panel adapter is suitable for all EnstoNet XL couplers. The panel adapter can be installed into a standard 50mm dia aperture using the counter nut accessory. Where a counter nut is not used a specific aperture can be laser cut or punched and the panel adapter clipped into place. The panel adapter has a fixing lug at the base for additional support if needed.

Strain-reliefs are suitable for all EnstoNet XL couplers. There are four types of strain relief accommodating two types of cable diameter and two types of metal conduit diameters.

NK3P.W panel mounting adapter is a separate product and delivered without coupler, enabling pre-wiring. The panel mounting adapter is suitable for use both with 3-pole plug or socket and screw or screwless coupler without strain-relief.