Штеккеры для подключения электропитания
6107 товаров
- Сортировка
- Вид каталога
Grey (a+, b-)
Код поставщика
NCS21.G
Класс ETIM
EC002566 - Приборный штекерный разъём для подключения в зданиях
Код РАЭК
1582214
Grey (a+, b-)
Код поставщика
NCS22.G
Класс ETIM
EC002566 - Приборный штекерный разъём для подключения в зданиях
Код РАЭК
1582215
T-Verteiler 2-pol. Kod. B; Steuerung
T-Verteiler 4-pol. Kod. B; Kleinspan
h-Vert. 2-pol. (St / -) (Bu-Bu); Kod
h-Vert. 4-pol. (St/-) (Bu-Bu); Kod.
T-Verteiler 2-pol. Kod. B; Steuerung
T-Verteiler 4-pol. Kod. B; Bus-Anwen
h-Vert. 4-pol. (St / -) (Bu-Bu); Kod
Black, narrow drop, without latches
The item is used in connecting a light fitting or other device to the network supplying it. Replaces the NAD3T.B -T-connector if there is not enough space in the device for side locking latches. The counter coupling in the fitting is either NAC31H.B or NAS31H.B fitted in the device by the 3-pole narrow panel mounting adapter NK3PF.B. The T-connector is fed with a NAC32S.B -coupler (or with an installation-ready cableset, where the NAC32S.B is coupled). The installation continues from the T-connector to the next device with a NAC 31S.B (or with an installation-ready ...
White, narrow drop, without latches
The item is used in connecting a light fitting or other device to the network supplying it. Replaces the NAD4T.W -T-connector if there is not enough space in the device for side locking latches. The counter coupling in the fitting is either NAC41H.W or NAS41H.W fitted in the device by the panel mounting adapter NK4PF.W. The T-connector is fed with a NAC42S.W -coupler (or with an installation-ready cableset, where the NAC42S.W is coupled). The installation continues from the T-connector to the next device with a NAC 41S.W (or with an installation-ready cableset, where the ...
Black
With distribution block NAD56.B a 3 phase supply is branched into 6 single phase outputs. 3 phase supply can be continued through the block to e.g. the following distribution block.
The distribution block can be fixed to e.g. a mounting plate with the mounting foot supplied with the distribution block using 4 screws, max. ø 4.2 mm. The distribution block does also partly fit into a min. 70 mm wide lighting track. In this case no separate mounting foot is needed.
Black
The item is used in connecting a light fitting or other device to the network supplying it. The counter coupling in the fitting is either NAC31.B or NAS31.B fitted in the device by the panel mounting adapter NK3P.B. The T-connector is fed with a NAC32S.B -coupler (or with an installation-ready cableset, where the NAC32S.B is coupled). The installation continues from the T-connector to the next device with a NAC 31S.B (or with an installation-ready cableset, where the NAC 31S.B is coupled).
Black
Distribution block with one in (for a socket) and three out (for plugs). The couplers to be connected to the distribution block are specified in the coupling illustration. If needed, the distribution block can be mounted to a base with two screws, max. ø 3,5 mm, distance between mounting holes 58 mm.
Black
Distribution block with one in (for a socket) and three out (for plugs). The couplers to be connected to the distribution block are specified in the coupling illustration. If needed, the distribution block can be mounted to a base with two screws, max. ø 3,5 mm, distance between mounting holes 28 mm.
Black
The item is used in connecting a light fitting or other device to the network supplying it. Mounts to a ø 20 mm hole in the device with the M20 cable gland and a counter screw of the T-connector. The T-connector has 160 mm long, halogen free stranded wires, which will be wired to the connection coupler in the device. The T-connector is fed with a NAC32S.B -coupler (or with a prefabricated cableset). The installation continues from the T-connector to the next device with a NAC 31S.B (or with an installation-ready cableset).
White, 1,0 m
The item is used in connecting a light fitting or other device to the network supplying it. The T-connector has a 1,0 m long, halogen free, stranded cable. The free end of the cable is stripped, which will be wired to the connection coupler in the device. The T-connector is fed with a NAC32S.W -coupler (or with a prefabricated cableset). The installation continues from the T-connector to the next device with a NAC31S.W (or with an installation-ready cableset).
ENSTO Т-блок 2-п 32A, питание2-pole, 32 A, power
T-distributors have one input and two outputs. The input is always located on the left side when looking at the connector mounted. The input is always connected to a female socket coupler and the outputs to male plug couplers. The T-distributor can be fixed to a wall or ceiling using max. Ø 5mm flat head screws or with cable ties.
ENSTO Т-блок 5-п 25A питание, выход L25-pole 25 A, 3-phase cont. L2 out
T-distributors have one input and two outputs. The input is always located on the left side when looking at the connector mounted. The input is always connected to a female socket coupler and the outputs to male plug couplers. The T-distributor can be fixed to a wall or ceiling using max. Ø 5mm flat head screws or with cable ties.
ENSTO Т-блок 5-п 25A питание, выход L35-pole 25 A, 3-phase cont. L3 out
T-distributors have one input and two outputs. The input is always located on the left side when looking at the connector mounted. The input is always connected to a female socket coupler and the outputs to male plug couplers. The T-distributor can be fixed to a wall or ceiling using max. Ø 5mm flat head screws or with cable ties.
ENSTO Т-блок 3-п 32A, предохранитель 10A, выключатель, управление3-pole 32 A, fused 10 A, switch, control
Fused T-distributors have a 2-pole switch (N, L) with a 5 x 20 mm fuse. Fused T-distributors come provided with 10 A fuse. The fuse drawer has space for a spare fuse and, if needed the fuse holder can be padlocked into an open position for secured isolation. The fused T-distributors also comes with a switch. The switch indicates if the power is on in the downwards going outlet. The switch is lit and has an O/I indicator.
ENSTO Т-блок 5-п 25A, управление5-pole, 25 A, control
T-distributors have one input and two outputs. The input is always located on the left side when looking at the connector mounted. The input is always connected to a female socket coupler and the outputs to male plug couplers. The T-distributor can be fixed to a wall or ceiling using max. Ø 5mm flat head screws or with cable ties.
single-phase, for a controllable five-pole switch and two single-phase lighting groups
The single-phase, continuous NGJKML335 switchbox is designed for controlling two single-phase lighting groups. With this switchbox, the trunk line is branched into a three-pole output to a switch, which serves as the main switch. This series is equipped with an outlet for a five-pole switch. The switch can be used to control two lighting groups. In addition to the phase, zero and protective earth are connected to the five-pole switch, and therefore the supply to a cleaning socket located next to a door frame can be connected via the switchbox.
with a holding circuit, three-phase continuous, with a five-pole switch and external control, for two single-phase lighting groups
The three-phase, continuous NGJRM552 switchbox is designed for controlling two single-phase lighting groups as an energy-saving solution. When daylight is sufficient to provide the required light level, one of the lighting groups may be switched off by a daylight sensor. The other lighting group is controlled in the normal manner via a switch.
single-phase, continuous, for push button control, for one single-phase lighting outlet
The single-phase, continuous NGJRM31 impulse relay box is designed for controlling a single-phase lighting group via a push button-controlled impulse relay. A designated lead set for connecting the switch to a switchbox is available in the EnstoNet installation range.
Three-phase, continuous, for bus control
The NGJKM525.WG switchbox is designed for controlling a lighting system via bus control. The switchbox is equipped with a three-phase continuous supply. Input and output with two-pole couplers for bus-control switches and motion detectors. Power supply and control for three lighting groups with grey five-pole couplers.
Штеккерный шнур (патч-корд) 5000мм 3-пол маркировка L, N, PE 2.5мм² черный 20А 250В IP20 WagoVK Verbindungsleitung Kod.A Bu/St 3x
Код поставщика
771-6993/007-501
Класс ETIM
EC002587 - Штеккерный шнур (патч-корд) для коммутации устройств в зданиях
Код РАЭК
706382
Штеккерный шнур (патч-корд) 2000мм 3-пол маркировка L, N, PE 2.5мм² черный 20А 250В IP20 WagoVK Verbindungsleitung Kod.A Bu/St 3x
Код поставщика
771-6993/007-201
Класс ETIM
EC002587 - Штеккерный шнур (патч-корд) для коммутации устройств в зданиях
Код РАЭК
706378
Штеккерный шнур (патч-корд) 7000мм 3-пол маркировка L, N, PE 2.5мм² белый 20А 250В IP20 WagoVK Verbindungsleitung Kod.A Bu/St 3x
Код поставщика
771-6993/007-702
Класс ETIM
EC002587 - Штеккерный шнур (патч-корд) для коммутации устройств в зданиях
Код РАЭК
706385