Зажим/сжим ответвительный
493 товара
- Сортировка
- Вид каталога
Влагозащищенный ответвительный зажим (CBP 1) - ВК
Влагозащищенный ответвительный зажим, 35-70/6-25
Зажим плашечный (ПА-1-1)
Плашечный зажим, 2х болтовой 5,1-9,0
Зажим плашечный (ПС-2-1)
Плашечный зажим, 9,1-12,0
Прокалывающий зажим Al/Cu 50-150 мм² / Al/Cu 70-240 мм², герметичный
Прокалывающий зажим Al/Cu 50-150 мм² / Al/Cu 70-240 мм², герметичный
Прокалывающий зажим Al/Cu 70-120 мм² / Al/Cu 70-240 мм², герметичный
Прокалывающий зажим Al/Cu 70-120 мм² / Al/Cu 70-240 мм², герметичный
1x2.5-35 mm²
Reusable connectors is specially designed for use with universal piercing connectors e.g. SLIW57 up to 1000 V a.c. Allows service line disconnection without removing a main connector. SLIW65 is for use with aluminium or copper conductors
PAS/BLL-T 50-157 mm² AlMgSi, with plain horn and Al-thread
The connector SEW20.2 includes an Al-thread to connect the connector to the neck of the insulator. The length of 25 mm² Al thread is 2.1 m. The connector is watertight by silicone greased teeth.
PAS/BLL-T 150-241 AlMgSi, with plain hornand Al-thread
The connector SEW21.2 includes an Al-thread to connect the connector to the neck of the insulator. The length of 25 mm² Al thread is 2.1 m. The connector is watertight by silicone greased teeth.
PAS/BLL-T 150-241 AlMgSi, with plain horn
The connector SEW21.1 includes an arc protection horn and is used for arc protection for covered conductors. The connector is watertight by silicone greased teeth.
Al/Cu 16-150 mm² and Al 16-120 mm², Cu 16-95 mm²
All connections of insulated/bareline aluminium and copper main and branch conductors up to 1000 VAC. SLIP32.21 connector has special multitooth construction.
In comparison with the conventional blade type connectors the SLIP-series with many contact points offers many advantages for example less mechanical damage to the main conductor, better electrical features, endures vibration better and no need for additional end-caps.
AAAC 16-50 mm²
SN2.2 is used for the termination of aluminium conductors to poles or walls. Equipped with two M8 bolts.
Al 16-120 mm² / Cu 6-35 mm²
SM2.25 is for non tension aluminium to copper connections. As the upper section of the connector is divided, two copper branch conductors with different diameters can be connected to the aluminium main conductor. The connectors are brushed and prepared with joint compound, thus only the conductors need brushing and greasing. SM 2.25 is equipped with springs to make the installation even easier. Equipped with two M8 bolt.
Al/Cu 50-240 / Al 50-185 Cu 50-150 mm²
SL14.2 is for Al or Cu connections where no mechanical tension is involved. The body is made of tin plated aluminium alloy, and the bolts are hot-dip galvanized steel.
Al 16-95 mm² / Cu 2.5-25 mm²
SM2.11 is for non tension aluminium to copper connections. The connectors are brushed and prepared with joint compound, thus only the conductors need brushing and greasing. Equipped with one M8 bolt.
Cu 16-70 mm² and 10-50 mm²
SE12.1 is for non tension copper to copper connections or for the connection of an earthing conductor. The connector is made of copper and the bolt is stainless steel.
AL 16-120 mm² and Al 16-35 mm²
SL9.11 is used for aluminium to aluminium connections. The connector has one bolt.
PAS/BLL-T 50-157 / 50-157 AlMgSi
The connector SLW25.22 is for non-tension aluminium to aluminium connections in MV up to 36 kV covered conductors without peeling the insulation. The connector is watertight by silicone greased teeth. The nominal insulation thickness of the conductor varies between 2.3-3.3 mm. Especially used with CC conductors. The connectors can be used with insulation cover SP16. Connector SLW25.22 is equipped with a shear head bolt.
2x6-35 mm²
Multitap connectors is specially designed for use with universal piercing connectors e.g. SLIW57, SLIW58, SL11.118, SLIP22.1,SLIP22.127 and SLIP32.2 up to 1000 V a.c. to facilitate several out-going conductors. Each branch conductor can be connected with a separate screw.
4x6-35 mm²
Multitap connectors is specially designed for use with universal piercing connectors e.g. SLIW57, SLIW58, SL11.118, SLIP22.1, SLIP22.127 and SLIP32.2 up to 1000 V a.c. to facilitate several out-going conductors. Each branch conductor can be connected with a separate screw.
1x2.5-35 mm²
Reusable connectors is specially designed for use with universal piercing connectors e.g. SLIW57 up to 1000 V a.c. Allows service line disconnection without removing a main connector. SLIW65S is for use with aluminium or copper conductors
Al/Cu 10-95 mm² to Al/Cu 1.5-50 mm²
The SLIP12.1 is used for all connections of insulated aluminium and copper main and branch conductors up to 1000Vac. The design enables hot line installation. Equipped with shear head screw.
25-95 mm², tinned
PSS830 is used with live-line connectors SL30, SL30.1 and SL36, when branch conductor is copper. The sleeve is tin coated aluminium and it is installed into live-line clamp. The inner diameter of the sleeve is 16 mm (outer 18 mm).
MV CC 150-241 mm²
The SEW31 is used for temporary earthing for Medium Voltage Covered Conductors (MV CC). The connector is watertight by silicone greased teeth. The nominal insulation thickness of the conductor can be between 2.3-4.0 mm.
MV CC 50-157 mm²
The SEW30 is used for temporary earthing for Medium Voltage Covered Conductors (MV CC). The connector is watertight by silicone greased teeth. The nominal insulation thickness of the conductor can be between 2.3-4.0 mm.