Зажим/сжим ответвительный
498 товаров
- Сортировка
- Вид каталога
CT1S 95 А (ответвительный зажим) - ВК
Ответвительный герметичный зажим (испытания 4кВ в воде).
Код поставщика
CT1S 95 А - ВК
Класс ETIM
EC001062 - Зажим/сжим ответвительный
Код РАЭК
900558
Бренд
ТД-ВЛИ-КОМПЛЕКТ
CT 25 А (ответвительный зажим) - ВК
Ответвительный герметичный зажим (испытания 4кВ в воде).
Код поставщика
CT 25 А - ВК
Класс ETIM
EC001062 - Зажим/сжим ответвительный
Код РАЭК
900556
Бренд
ТД-ВЛИ-КОМПЛЕКТ
CMCC (ответвительный зажим) - ВК
Зажим для наложения защитного заземления
Код поставщика
CMCC - ВК
Класс ETIM
EC001062 - Зажим/сжим ответвительный
Код РАЭК
900554
Бренд
ТД-ВЛИ-КОМПЛЕКТ
PAS/BLL-T 50-157 mm² AlMgSi, with temporary earthing horn
SEW20.4 is used as a temporary earthing connector where the arc protection devices SEW20.1 or SEW20.2 are not present. The connector SEW20.4 includes an arc protection horn suitable for use with temporary earthing devices with screw fixing. The connector SEW20.4 includes an Al-thread to connect the connector to the neck of the insulator. The length of 25 mm² Al thread is 2.1 m. The connector is watertight by silicone greased teeth.
4x1.5-25 mm² Cu and 4x10-35 mm² Al, multitap
Multitap connectors is specially designed for use with universal piercing connectors e.g. SL11.118 and SLIP22.1 up to 1000 V a.c. to facilitate several out-going conductors. Each branch conductor can be connected with a separate screw.
Болтовой ответвительный зажим (MDT-240)
Болтовые ответвительные зажимы, 95-240/95-240
CTN 95 (зажим для ответвления) - ВК
Зажим для ответвления СИП от ВЛН.Сечение Сип в магистрали 16-95кв.мм, сечение СИП на ответвлениях 25-95кв.мм
Код поставщика
CTN 95 - ВК
Класс ETIM
EC001062 - Зажим/сжим ответвительный
Код РАЭК
764032
Бренд
ТД-ВЛИ-КОМПЛЕКТ
Влагозащищенный ответвительный зажим (CBP EP)
Влагозащищенный ответвительный зажим, 16-25/4-25
Зажим ответвительный P 72
10-50 mm² / 1.5-10 mm², Waterproof
SLIW50 is for use with insulated aluminium or copper conductors. Fully insulated bolt provides safe live line working. Both main and branch conductor insulations are pierced by single bolt action. Test voltage 6 kV/50 Hz/1 min in water. Connector's design enables hot line installation without peeling insulation from conductor.
Al/Cu 16-95 mm² / 2.5-25 mm²
SLIW63 is for all connections of uninsulated aluminium and copper main and insulated branch conductors up to 1000 V AC. Equipped with shear head screw.
Al/Cu 16-95 mm² / 16-95 mm²
SLIW64 is for all connections of uninsulated aluminium and copper main and insulated branch conductors up to 1000 V AC. Equipped with shear head screw.
With plain horn, PAS/BLL-T 50-157 mm² AlMgSi
The connector SEW20.1 includes an arc protection horn and is used for arc protection for covered conductors. The connector is watertight by silicone greased teeth.
CC Al 50-157 / Bare Al 35-157 mm²
The connector SEW20.7 can be used for medium voltage covered conductor to bare conductor connections. The connector is watertight by silicone greased teeth.
Al 50-240 mm² / Cu 10-95 mm²
SM4.21 is for non tension aluminium to copper connections. As the upper section of the connector is divided, two copper branch conductors with different diameters can be connected to the aluminium main conductor. The connectors are brushed and prepared with joint compound, thus only the conductors need brushing and greasing. Equipped with two M10 bolts.
Al 50-240 mm² / Al 50-240 mm²
SL8.21 connector is brushed and prepared with joint compound and so, only the conductors need brushing and greasing. For non tension aluminium to aluminium connections. Equipped with two M10 bolts.
Al 16-120 mm² / Al 16-120 mm²
SL4.25 is brushed and prepared with joint compound and so, only the conductors need brushing and greasing. SL4.25 is equipped with springs. Non tension aluminium to aluminium connector is equipped with two M8 bolts.
Al 16-150 mm² / Al 16-150 mm²
Non tension aluminium to aluminium LV and MV connections. The SL39.2 connector is suitable for AAC, AAAC and ACSR conductors. Equipped with two M8 bolts.
16-120 mm²
Branching of 1-3 out-going cables, max. Al 120 mm² with cover SP24 for insulated conductors up to 1000 VAC.
PAS/BLL-T 50-157 AlMgSi
Used as a live line branching connector for covered conductors. The connector is made of corrosion resistant aluminium and the bolts are of stainless steel. The connector is watertight by silicone greased teeth. For copper branch conductors, the sleeve PSS830 is needed. The installation can be made with a live line rod e.g. CT48.