Компактный распределитель-разъём

With distribution block NAD56.W a 3 phase supply is branched into 6 single phase outputs. 3 phase supply can be continued through the block to e.g. the following distribution block. The distribution block can be fixed to e.g. a mounting plate with the mounting foot supplied with the distribution block using 4 screws, max. ø 4.2 mm. The distribution block does also partly fit into a min. 70 mm wide lighting track. In this case no separate mounting foot is needed.

With the switchbox, a continuous three-phase supply is branched into an output for a five-pole switch and two lighting groups. In addition to the phase, zero and protective earth are supplied to the switch, and therefore the supply to a cleaning socket located next to a door frame can be connected via the switchbox.

With the switchbox, a continuous three-phase supply is branched into an output for a five-pole switch and two lighting groups. In addition to the phase, zero and protective earth are supplied to the switch, and therefore the supply to a cleaning socket located next to a door frame can be connected via the switchbox.

With the switchbox, a continuous three-phase supply is branched into an output for a five-pole switch and two lighting groups. In addition to the phase, zero and protective earth are supplied to the switch, and therefore the supply to a cleaning socket located next to a door frame can be connected via the switchbox.

The single-phase, continuous NGJKM351 switchbox is designed for controlling a lighting group. The five-pole switch is used to control two separate lighting groups via a five-pole outlet. In addition to the phase, zero and protective earth are connected to the switch, making it possible to connect the supply to a cleaning socket located next to a door frame via the switchbox.

Distribution block NBD36.S has one ingoing supply to which a socket is being connected and seven outgoing outputs to which plugs are being connected. Couplers that are to be connected are shown in the connection diagram. The distribution block can be fixed to e.g. a mounting plate with the mounting foot supplied with the distribution block using 4 screws, max. ø 4.2 mm. The distribution block does also partly fit into a min. 70 mm wide lighting track. In this case no separate mounting foot is needed.

The item is used in connecting a light fitting or other device to the network supplying it. The counter coupling in the fitting is either NAC51.B or NAS51.B fitted in the device by the panel mounting adapter NK5P.B. The T-connector is fed with a NAC52S.B -coupler (or with an installation-ready cableset, where the NAC52S.B is coupled). The installation continues from the T-connector to the next device with a NAC51S.B (or with an installation-ready cableset, where the NAC51S.B is coupled).

Distribution block with one in (for a socket) and three out (for plugs). The couplers to be connected to the distribution block are specified in the coupling illustration. If needed, the distribution block can be mounted to a base with two screws, max. ø 3,5 mm, distance between mounting holes 28 mm.

The item is used in connecting a light fitting or other device to the network supplying it. Mounts to a ø 20 mm hole in the device with the M20 cable gland and a counter screw of the T-connector. The T-connector is chosen according to the phase (L1, L2 or L3) the device is connected to. The T-connector has 160 mm long, halogen free stranded wires, which will be wired to the connection coupler in the device. The T-connector is fed with a NBC52S.S -coupler (or with a prefabricated cableset). The installation continues from the T-connector to the next device with a NBC51S.S ...

EnstoNet distributors can be used to replace conventional connection boxes in modular wiring installations. They are quick to install and ensure error free wiring connections.

EnstoNet distributors can be used to replace conventional connection boxes in modular wiring installations. They are quick to install and ensure error free wiring connections.

EnstoNet distributors can be used to replace conventional connection boxes in modular wiring installations. They are quick to install and ensure error free wiring connections.

With the NAJDM33 distribution box, a single-phase supply is branched into three single-phase outputs.

Distribution box NAJDM36.B directs a single-phase supply into six single-phase outlets.

T-distributors have one input and two outputs. The input is always located on the left side when looking at the connector mounted. The input is always connected to a female socket coupler and the outputs to male plug couplers. The T-distributor can be fixed to a wall or ceiling using max. Ø 5mm flat head screws or with cable ties.