Компактный распределитель-разъём

Distribution block with one in (for a socket) and three out (for plugs). The couplers to be connected to the distribution block are specified in the coupling illustration. If needed, the distribution block can be mounted to a base with two screws, max. ø 3,5 mm, distance between mounting holes 28 mm.

The item is used in connecting a light fitting or other device to the network supplying it. Mounts to a ø 20 mm hole in the device with the M20 cable gland and a counter screw of the T-connector. The T-connector has 160 mm long, halogen free stranded wires, which will be wired to the connection coupler in the device. The T-connector is fed with a NAC32S.B -coupler (or with a prefabricated cableset). The installation continues from the T-connector to the next device with a NAC 31S.B (or with an installation-ready cableset).

The item is used in connecting a light fitting or other device to the network supplying it. The T-connector has a 1,0 m long, halogen free, stranded cable. The free end of the cable is stripped, which will be wired to the connection coupler in the device. The T-connector is fed with a NAC32S.W -coupler (or with a prefabricated cableset). The installation continues from the T-connector to the next device with a NAC31S.W (or with an installation-ready cableset).

T-distributors have one input and two outputs. The input is always located on the left side when looking at the connector mounted. The input is always connected to a female socket coupler and the outputs to male plug couplers. The T-distributor can be fixed to a wall or ceiling using max. Ø 5mm flat head screws or with cable ties.

T-distributors have one input and two outputs. The input is always located on the left side when looking at the connector mounted. The input is always connected to a female socket coupler and the outputs to male plug couplers. The T-distributor can be fixed to a wall or ceiling using max. Ø 5mm flat head screws or with cable ties.

T-distributors have one input and two outputs. The input is always located on the left side when looking at the connector mounted. The input is always connected to a female socket coupler and the outputs to male plug couplers. The T-distributor can be fixed to a wall or ceiling using max. Ø 5mm flat head screws or with cable ties.

Fused T-distributors have a 2-pole switch (N, L) with a 5 x 20 mm fuse. Fused T-distributors come provided with 10 A fuse. The fuse drawer has space for a spare fuse and, if needed the fuse holder can be padlocked into an open position for secured isolation. The fused T-distributors also comes with a switch. The switch indicates if the power is on in the downwards going outlet. The switch is lit and has an O/I indicator.

T-distributors have one input and two outputs. The input is always located on the left side when looking at the connector mounted. The input is always connected to a female socket coupler and the outputs to male plug couplers. The T-distributor can be fixed to a wall or ceiling using max. Ø 5mm flat head screws or with cable ties.

The single-phase, continuous NGJKML335 switchbox is designed for controlling two single-phase lighting groups. With this switchbox, the trunk line is branched into a three-pole output to a switch, which serves as the main switch. This series is equipped with an outlet for a five-pole switch. The switch can be used to control two lighting groups. In addition to the phase, zero and protective earth are connected to the five-pole switch, and therefore the supply to a cleaning socket located next to a door frame can be connected via the switchbox.

The three-phase, continuous NGJRM552 switchbox is designed for controlling two single-phase lighting groups as an energy-saving solution. When daylight is sufficient to provide the required light level, one of the lighting groups may be switched off by a daylight sensor. The other lighting group is controlled in the normal manner via a switch.

The single-phase, continuous NGJRM31 impulse relay box is designed for controlling a single-phase lighting group via a push button-controlled impulse relay. A designated lead set for connecting the switch to a switchbox is available in the EnstoNet installation range.

The NGJKM525.WG switchbox is designed for controlling a lighting system via bus control. The switchbox is equipped with a three-phase continuous supply. Input and output with two-pole couplers for bus-control switches and motion detectors. Power supply and control for three lighting groups with grey five-pole couplers.

The item is used in connecting a light fitting or other device to the network supplying it. The counter coupling in the fitting is either NAC31.W or NAS31.W fitted in the device by the panel mounting adapter NK3P.W. The T-connector is fed with a NAC32S.W -coupler (or with an installation-ready cableset, where the NAC32S.W is coupled). The installation continues from the T-connector to the next device with a NAC 31S.W (or with an installation-ready cableset, where the NAC 31S.W is coupled).

The item is used in connecting a light fitting or other device to the network supplying it. The counter coupling in the fitting is either NAC51.W or NAS51.W fitted in the device by the panel mounting adapter NK5P.W. The T-connector is fed with a NAC52S.W -coupler (or with an installation-ready cableset, where the NAC52S.W is coupled). The installation continues from the T-connector to the next device with a NAC51S.W (or with an installation-ready cableset, where the NAC51S.W is coupled).

Distribution block with one in (for a socket) and three out (for plugs). The couplers to be connected to the distribution block are specified in the coupling illustration. If needed, the distribution block can be mounted to a base with two screws, max. ø 3,5 mm, distance between mounting holes 28 mm.

Distribution block with one in (for a socket) and three out (for plugs). The couplers to be connected to the distribution block are specified in the coupling illustration. If needed, the distribution block can be mounted to a base with two screws, max. ø 3,5 mm, distance between mounting holes 38 mm.