Компактный распределитель-разъём

The item is used in connecting a light fitting or other device to the network supplying it. Mounts to a ø 20 mm hole in the device with the M20 cable gland and a counter screw of the T-connector. The T-connector is chosen according to the phase (L1, L2 or L3) the device is connected to. The T-connector has 160 mm long, halogen free stranded wires, which will be wired to the connection coupler in the device. The T-connector is fed with a NAC52S.W -coupler (or with a prefabricated cableset). The installation continues from the T-connector to the next device with a NAC51S.W ...

EnstoNet distributors can be used to replace conventional connection boxes in modular wiring installations. They are quick to install and ensure error free wiring connections.

EnstoNet distributors can be used to replace conventional connection boxes in modular wiring installations. They are quick to install and ensure error free wiring connections.

EnstoNet distributors can be used to replace conventional connection boxes in modular wiring installations. They are quick to install and ensure error free wiring connections.

EnstoNet distributors can be used to replace conventional connection boxes in modular wiring installations. They are quick to install and ensure error free wiring connections.

EnstoNet distributors can be used to replace conventional connection boxes in modular wiring installations. They are quick to install and ensure error free wiring connections.

EnstoNet distributors can be used to replace conventional connection boxes in modular wiring installations. They are quick to install and ensure error free wiring connections.

EnstoNet distributors can be used to replace conventional connection boxes in modular wiring installations. They are quick to install and ensure error free wiring connections.

EnstoNet distributors can be used to replace conventional connection boxes in modular wiring installations. They are quick to install and ensure error free wiring connections.

Prefabricated cable sets are used for electrical installations in the buildings. Modular wiring solutions provide quick installation that is completely error free. Prefabricated cable products do not generate any waste at site.

With distribution block NCD56.P a 3 phase supply is branched into 6 single phase outputs. 3 phase supply can be continued through the block to e.g. the following distribution block. The distribution block can be fixed to e.g. a mounting plate with the mounting foot supplied with the distribution block using 4 screws, max. ø 4.2 mm. The distribution block does also partly fit into a min. 70 mm wide lighting track. In this case no separate mounting foot is needed.

The item is used in connecting a light fitting or other device to the network supplying it. The counter coupling in the fitting is either NCC51.P or NCS51.P fitted in the device by the panel mounting adapter NK5P.P. The T-connector is fed with a NCC52S.P -coupler. The installation continues from the T-connector to the next device with a NCC51S.P.

The item is used in connecting a light fitting or other device to the network supplying it. The counter coupling in the fitting is either NCC51.G or NCS51.G fitted in the device by the panel mounting adapter NK5P.G. The T-connector is fed with a NCC52S.G -coupler (or with an installation-ready cableset, where the NCC52S.G is coupled). The installation continues from the T-connector to the next device with a NCC51S.G (or with an installation-ready cableset, where the NCC51S.G is coupled).

The NGJDM633M T-connector is used in connecting the operating voltage and the control signal to the light fitting. NGJDM633M has an extra white wire for permanent live to emergency fittings. The T-connector is fixed to the light fitting with a M20 cable gland and a counter screw. The operating voltage is supplied with three stranded 1,5 mm² connecting wires and the control signal with two 1,5 mm² connecting wires. The length of the connecting wires is 250 mm. The T-connector is supplied assembled and equipped with NAC31H2.W, NAC32H2.W, NBC31H1.S and NBC32H1.S -couplers. ...

The NGJDM633SM T-connector is used for connecting light fittings or other devices to a 6-pole circuit. The T-connector has a 0,4 m cable drop which is connected to the fitting. NGJDM633SM has a 6G1,0 cable drop with the extra white wire for permanent live to emergency fittings. The T-connector is supplied pre-assembled with NAC31H2.W, NAC32H2.W, NBC31H1.S and NBC32H1.S connectors. The 6-pole T-connectors are connected to the circuit with cable sets that have to be ordered separately.

The NGJDP692.WS distribution box can be installed after a control unit for lighting to divide a certain storey of a building’s main supply line, for example. The distribution box has a vertical six-pole supply and nine horizontal outlets with six-pole combination couplers (white and blue).

The continuous single-phase NGJFM335C relay box is designed for controlling lighting and it is equipped with wireless control between the relay box and the switch. The wireless control is based on Schneider’s CONNECT system. The EnstoNet boxes may be equipped with wireless receivers from a variety of manufacturers. If the lighting load is high, the NGJRM33 relay box should be installed instead of a RF relay box. An auxiliary relay box can be fixed to the RF box directly with an installation coupler.

The item is used when connecting a light fitting or other device to the supplying network. The counter part in the fitting is a 6-pole combination coupler fitted in the device by the panel mounting adapter NK6P.W. The T-connector is fed with a NGCST6233 coupler. The installation continues from the T-connector to the next device with a NGCST6133 coupler.

The item is used in connecting a light fitting or other device to the network supplying it. Replaces the NAD3T.B -T-connector if there is not enough space in the device for side locking latches. The counter coupling in the fitting is either NAC31H.B or NAS31H.B fitted in the device by the 3-pole narrow panel mounting adapter NK3PF.B. The T-connector is fed with a NAC32S.B -coupler (or with an installation-ready cableset, where the NAC32S.B is coupled). The installation continues from the T-connector to the next device with a NAC 31S.B (or with an installation-ready ...

The item is used in connecting a light fitting or other device to the network supplying it. Replaces the NAD4T.W -T-connector if there is not enough space in the device for side locking latches. The counter coupling in the fitting is either NAC41H.W or NAS41H.W fitted in the device by the panel mounting adapter NK4PF.W. The T-connector is fed with a NAC42S.W -coupler (or with an installation-ready cableset, where the NAC42S.W is coupled). The installation continues from the T-connector to the next device with a NAC 41S.W (or with an installation-ready cableset, where the ...

With distribution block NAD56.B a 3 phase supply is branched into 6 single phase outputs. 3 phase supply can be continued through the block to e.g. the following distribution block. The distribution block can be fixed to e.g. a mounting plate with the mounting foot supplied with the distribution block using 4 screws, max. ø 4.2 mm. The distribution block does also partly fit into a min. 70 mm wide lighting track. In this case no separate mounting foot is needed.

The item is used in connecting a light fitting or other device to the network supplying it. The counter coupling in the fitting is either NAC31.B or NAS31.B fitted in the device by the panel mounting adapter NK3P.B. The T-connector is fed with a NAC32S.B -coupler (or with an installation-ready cableset, where the NAC32S.B is coupled). The installation continues from the T-connector to the next device with a NAC 31S.B (or with an installation-ready cableset, where the NAC 31S.B is coupled).

Distribution block with one in (for a socket) and three out (for plugs). The couplers to be connected to the distribution block are specified in the coupling illustration. If needed, the distribution block can be mounted to a base with two screws, max. ø 3,5 mm, distance between mounting holes 58 mm.