Компактный распределитель-разъём

The item is used in connecting a light fitting or other device to the network supplying it. Mounts to a ø 20 mm hole in the device with the M20 cable gland and a counter screw of the T-connector. The T-connector has 160 mm long, halogen free stranded wires, which will be wired to the connection coupler in the device. The T-connector is fed with a NAC32S.W -coupler (or with a prefabricated cableset). The installation continues from the T-connector to the next device with a NAC 31S.W (or with an installation-ready cableset).

Distribution block NCD36.P has one ingoing supply to which a socket is being connected and seven outgoing outputs to which plugs are being connected. Couplers that are to be connected are shown in the connection diagram. The distribution block can be fixed to e.g. a mounting plate with the mounting foot supplied with the distribution block using 4 screws, max. ø 4.2 mm. The distribution block does also partly fit into a min. 70 mm wide lighting track. In this case no separate mounting foot is needed.

The item is used in connecting a light fitting or other device to the network supplying it. Replaces the NCD3T.P -T-connector if there is not enough space in the device for side locking latches. The counter coupling in the fitting is either NCC31H.P or NCS31H.P fitted in the device by the 3-pole narrow panel mounting adapter NK3PF.P. The T-connector is fed with a NCC32S.P -coupler. The installation continues from the T-connector to the next device with a NCC 31S.P.

The item is used in connecting a light fitting or other device to the network supplying it. The counter coupling in the fitting is either NCC31.P or NCS31.P fitted in the device by the panel mounting adapter NK3P.P. The T-connector is fed with a NCC32S.P-coupler (or with an installation-ready cable set, where the NCC32S.P is coupled). The installation continues from the T-connector to the next device with coupler NCC31S.P (or with an installation-ready cable set, where the NCC31S.P is coupled).

Distribution block NCD36.G has one ingoing supply to which a socket is being connected and seven outgoing outputs to which plugs are being connected. Couplers that are to be connected are shown in the connection diagram. The distribution block can be fixed to e.g. a mounting plate with the mounting foot supplied with the distribution block using 4 screws, max. ø 4.2 mm. The distribution block does also partly fit into a min. 70 mm wide lighting track. In this case no separate mounting foot is needed.

Distribution block with one in (for a socket) and three out (for plugs). The couplers to be connected to the distribution block are specified in the coupling illustration. If needed, the distribution block can be mounted to a base with two screws, max. ø 3,5 mm, distance between mounting holes 58 mm.

Distribution block with one in (for a socket) and three out (for plugs). The couplers to be connected to the distribution block are specified in the coupling illustration. If needed, the distribution block can be mounted to a base with two screws, max. ø 3,5 mm, distance between mounting holes 38 mm.

Distribution block with one in (for a socket) and three out (for plugs). The couplers to be connected to the distribution block are specified in the coupling illustration. If needed, the distribution block can be mounted to a base with two screws, max. ø 3,5 mm, distance between mounting holes 58 mm.

Distribution block with one in (for a socket) and three out (for plugs). The couplers to be connected to the distribution block are specified in the coupling illustration. If needed, the distribution block can be mounted to a base with two screws, max. ø 3,5 mm, distance between mounting holes 28 mm.

EnstoNet distributors can be used to replace conventional connection boxes in modular wiring installations. They are quick to install and ensure error free wiring connections.

H-разветвитель

H-разветвитель

H-разветвитель

H-разветвитель

Т-распределитель

Т-распределитель

Т-распределитель